Officerdibble Active Member Jun 1, 2025 #1 Hi guys anyone repleaced the rear panels is it hard to do ? Are the just riveted on ? Attachments image.jpg 284.4 KB · Views: 33 image.jpg 241.4 KB · Views: 28
A Anaconda Well-Known Member Jun 1, 2025 #2 Do you mean the side cappings that you have already removed or the other section? The other section are welded on but you could rivet and glue them on, or even just glue them on.
Do you mean the side cappings that you have already removed or the other section? The other section are welded on but you could rivet and glue them on, or even just glue them on.
Officerdibble Active Member Jun 1, 2025 #3 Not the side capping the rear end panels if they are welded on I guess they would be a bugger to get off
Not the side capping the rear end panels if they are welded on I guess they would be a bugger to get off
marjon Well-Known Member Full Member Jun 1, 2025 #5 What are you wanting to achieve? Cos they look very recoverable to a useable condition in place. J
F Forrest Gump Well-Known Member Jun 1, 2025 #6 Here’s a coupla photos from when I changed mine. Makes a few holes right enough but finish is ok with some careful work. Attachments IMG_3708.jpeg 434.1 KB · Views: 22 IMG_3707.jpeg 499.7 KB · Views: 24 IMG_3706.jpeg 431.1 KB · Views: 21 IMG_3704.jpeg 301.5 KB · Views: 22 IMG_3931.jpeg 530.2 KB · Views: 24 IMG_3930.jpeg 592.6 KB · Views: 25
Here’s a coupla photos from when I changed mine. Makes a few holes right enough but finish is ok with some careful work.
