L

lockmj

New Member
My second gear has trouble slotting in without grinding?? Sometimes it works fine other times i can hear the cogs grinding. Any clues its an 200tdi 110
 
I guess the problems are when it's cold.

Try leaving a slight pause when going from 1st (or third) in neutral before putting it in 2nd, then doing it slowly and purposefully. Gently gently catchee monkey!
 
not sure what gear box i would assume original and also not sure about the cold as i have not driven it much
 
It will be an LT77 and eirther the syncro is going on the gearbox or the clutych isn't engaging properly - you could try checking all the levels for starters, this might help a bit, but most likely is the syncro - just take it easy and change into gear a bit more slowly - don't fling it in, just do it slowly and firmly.
 
thats an LT77 then - reverse prob is a spring and ball - easy fix....

crunchy box - they all tend to do that - as said - live with it or get an exchange gear box.
 
Sounds like the gearbox is a bit tired. Just take it a bit easy with it and it will get you a few more tens of thousands of miles, but look after it!

Like i said, check all fluid levels, especially the clutch!
 
You must log in or register to reply here.

Similar threads

S
No gears!!
Replies
13
Views
935
tottot
tottot
T
Gear selection problem
Replies
3
Views
1K
miktdish
miktdish
9
R380 Gear Selection Issue
Replies
3
Views
930
Anaconda
A
tweedandbriar
Flat Spot at low revs...
Replies
4
Views
719
tweedandbriar
tweedandbriar
Padda.116
D2 Transfer Box exploded?
Replies
11
Views
988
MJI
MJI