R

R2BRY

New Member
Hi,

I am new to this so please be gentle. I have finally took the plunge and bought a 2000 P38 4.6 Vogue which i love. I got it home and realised that the washers for the front. rear and headlights don't work. I have checked both the fusebox under the driver seat and the one under the bonnet and all of the fuses are fine. I am assuming it is an electrical problem because all three sub systems have failed but don't know what to do next. Please help!!!!!!
 
As Kieth says, stalk on steering column. All my pumps were dead, got a used one from breaker for a tenner, fitted during MoT, been fine for months now.
 
Hey guys,

thanks for all your advice. I changed the stalk and..........no difference. What next? any ideas???
 
Hmm. I'd say time to check power is getting to the pumps when the switch is pressed by unplugging each pump and sticking a meter in the connector.
 
May be worth trying another relay or checking for fuse box corrosion too. Sure the stalk is a good one?
 
The washers are operated by the BECM, I would check the connectors on the BECM for corrosion and the wiring under the carpet by the door and in the A post for damage.
 
God this is getting complicated!!! i love my range but there are so many possibilities. tried to get access to the pumps but can't get anywhere near them. how do i do it? sorry to be a pain but as i said i am completely new to all of this
 
You must log in or register to reply here.

Similar threads

J
Range rover p38 2.5
2
Replies
32
Views
3K
RangeRoller dt
RangeRoller dt
Muji
P38A Please help me find a steering wheel hub and adapter for my 99 Range Rover P38.
Replies
4
Views
885
pwood999
pwood999
H
P38A P38 2.5DSE BMW High pressure fuel pump seal replacement
Replies
6
Views
1K
brianp38dse
brianp38dse
C
P38 NSR wheel bearing help needed
Replies
5
Views
910
Mark Piercy
Mark Piercy
J
windscreen washer pump
Replies
3
Views
541
lynall
L