R

rubah

New Member

• Aug 23, 2009

• #1

i have just fitted new seals/pistons in the calipers on my H reg discovery. when i bled the system i got a good pedal until the engine is running, then the pedal sinks to the floor.anyone had this happen i would be glad of your help. Rubah.

 

discool

Well-Known Member

• Aug 23, 2009

• #2

You have now got a leak, either at a caliper or master cylinder/servo only because of the higher pressure that was placed on the brake system with the engine running and the servo in operation.

 

hughesy

Well-Known Member

• Aug 23, 2009

• #3

Check for leaks but it's likely that the system still has some air in it.

 

R

rubah

New Member

• Aug 23, 2009

• #4

discool said:

You have now got a leak, either at a caliper or master cylinder/servo only because of the higher pressure that was placed on the brake system with the engine running and the servo in operation.

Click to expand...

thanks for that i will check for leaks.

 

discool

Well-Known Member

• Aug 23, 2009

• #5

rubah said:

thanks for that i will check for leaks.

Click to expand...

Hopefully, you will only have one