Hi, I need to change some of the spill off pipes, but looking at the last pipe coming from No 6 Cylinder it has been 'sealed off' with a screw (therefore blocking the return) where should this pipe go to so that I can re-instate the full fuel cycle as designed, I have checked with rave and it doesn't show the lay out of the pipe, just talks about removing/replacing the pipes at the injectors
jamesmartin
Well-Known Member
nowhere ,it should be blank
tomcat59alan
Well-Known Member
As above, shouldn't have a screw in it. Buy a leak off pipe kit from a motor factors and it will have a blanking cap in it.
tomcat59alan
Well-Known Member
Bladerunner919
Active Member
As a newcomer to the world of diesel, can someone explain what a spill off pipe does?
Littelwill
Well-Known Member
Littelwill
Well-Known Member
Basically they return exsess fuel to the pump I belive.. The injectors are always over fueled and the excess fuel can be recycled in a way..
The spill pipes return fuel that leaks past the injector internals to the tank.
tomcat59alan
Well-Known Member
Littelwill
Well-Known Member
