I looked can’t see any wires going to anything there you have a pic with where it would be?
Nope no oil cooler and the side of oil filter has oil pressure sending unit and 2 other blanked off holes. I just got this a month ago and it has the oil temp gauge so I’m assuming at one time it was hooked up and workedIm afraid not, there is only two places it can be that I am aware of , the sump (in the side) or the oil filter housing.
Has it worked in the past? Does it have an oil cooler?
Nope no oil cooler and the side of oil filter has oil pressure sending unit and 2 other blanked off holes. I just got this a month ago and it has the oil temp gauge so I’m assuming at one time it was hooked up and worked
Yea blank but a big one. Do you know what the wire color is that the sender would plug into on the firewall harness?Are the blanks screw in blanks? Its quite possible that its been removed and blanked off.
Yea blank but a big one. Do you know what the wire color is that the sender would plug into on the firewall harness?
Yea didn’t come up with anything. Wouldn’t the harness be the same on a military and civilian 1986?I could have a look through my workshop manuals for you over the week end but Im not sure if they cover military stuff, have you tried Google for a wiring diagram?
Yea didn’t come up with anything. Wouldn’t the harness be the same on a military and civilian 1986?