Discokids

Well-Known Member

• Nov 2, 2015

• #1

Hi all, I'm just in the process of rebuilding my sills/'C' pillars on my 110, and have lost the bit of paper I wrote these measurements on. Basically just the width of the door aperture, either seal lip to lip, total width, anything really so I can cross reference before I weld. Thank you

 

Flossie

Well-Known Member

• Nov 2, 2015

• #2

Stick the door back on?
I can go measure tomorrow if you want.
Front or 2nd row or both?

 

Discokids

Well-Known Member

• Nov 3, 2015

• #3

Cheers flossie, that would be brilliant. Just second row, front is not a problem. I did stick the door on but just wanted a second opinion.

 

Flossie

Well-Known Member

• Nov 3, 2015

• #4

74 cms dead.
That's measured door seal lip to door seal lip.
Measurement taken from near the 2nd row latch keep.

 

Discokids

Well-Known Member

• Nov 3, 2015

• #5

That's brilliant Flossie, thank you so much. Ill weld it up tonight.