Little Butch
Active Member
As above, I'm looking for an axle that will fit my 110 300tdi hicap to rebuild 
Anywhere close...ish to Ipswich would be ideal.
Anywhere close...ish to Ipswich would be ideal.
spencer1885
Active Member
I'm in Cambridge and have a front axle in bits from a 300 tdi discovery which I think is the same as defender if your interested.
its not.... but it will fit.
jamesmartin
Well-Known Member
300 tdi disco and defender axles are basically the same axle apart from calipers which are a straight swap over
arent the steering arms and damper different aswell?
spencer1885
Active Member
I was wondering what the difference was,thanks.
I all so have the rear axle complete and surplus if needed,cheap.
I all so have the rear axle complete and surplus if needed,cheap.
rear axle on a 110 is a salisbury. std disco rear is not strong enough
spencer1885
Active Member
I all so have one of those as well, but no rear cover.
jamesmartin
Well-Known Member
track rod and drag link differ due to positioning of steering damper,but axles are the same
jai_landrover
Well-Known Member
Spencer the Salisbury axle
drum or disc braked and how much??
drum or disc braked and how much??
spencer1885
Active Member
It's drum braked I'm sorry to say,it is a early one ten.
£50 ?
£50 ?
Little Butch
Active Member
What will I have to change if I were to fit a disco front axle then? Defender calipers, track rod and drag link?
spencer1885
Active Member
Just the brake calipers from what James Martin posted and he's the expert.
Use the Defender calipers and drag link.
Use the Defender calipers and drag link.
Little Butch
Active Member
I was hoping to rebuild the axle as well as calipers before swapping it with the one that's currently on there but looking at prices, it may be worth me buying new calipers anyway so the disco one would work for me...
spencer1885
Active Member
I may have defender calipers as well, free with the axle if that helps
They are cheap on ebay any way, I bought stainless steel pistons for mine
They are cheap on ebay any way, I bought stainless steel pistons for mine
