Dr_evil · Oct 24, 2013

Need the entire assembly, this is just to see if they fit my jag rear end so I don't have to make up spacers but they should as its a 10 spline set up on a salisbury diff

jamesmartin · Oct 24, 2013

you want complete wheel station including half shaft ,you do know lr salis arent 10 spline diff gears,so you might need those too

Dr_evil · Oct 24, 2013

I don't think I need the diff end, I only need the hub/stub axle part

Cant fit the half shaft to the jag axle as its going in a cranked casing using the UJ drive shafts or possibly CV if I get some cash together

jai_landrover · Oct 24, 2013

LR sals are all 24 spline.

std series rear stub axle hub assy is 10 spline

Dr_evil · Oct 24, 2013

I thought early series ones were 10 ?

If not Dana 44 ones are so I may get hold of some of them instead, its a 1.2" shaft which is same as Dana

jai_landrover · Oct 24, 2013

early series ones were 24 same as the later ones

Pikey · Oct 24, 2013

jai_landrover said:
early series ones were 24 same as the later ones

That's weird cos THere's a early series salisbury axle, in the workshop. that's deffo 10spline.

jai_landrover · Oct 24, 2013

you sure thats not the ENV axles?

Dr_evil · Oct 24, 2013

whats env ?

jai_landrover · Oct 24, 2013

EnV are 10 spline and far bigger in dia rover

Dr_evil · Oct 24, 2013

hmm they might work!

Pikey · Oct 24, 2013

Dr_evil said:
whats env ?

fitted to later (iia) Forward controls.

jai_landrover · Oct 24, 2013

lol good luck finding them they have all broken or been scrapped and the early forward conrol boys keep them stashed away incase the halfshaft twang

jamesmartin · Oct 24, 2013

Pikey said:
That's weird cos THere's a early series salisbury axle, in the workshop. that's deffo 10spline.

pics

Pikey · Oct 24, 2013

jai_landrover said:
you sure thats not the ENV axles?

Nope it's a series 109 salisbury. axle.

jai_landrover · Oct 24, 2013

I would like to see pics too

Dr_evil · Oct 24, 2013

I think I'll have to PM beasty and see what else he has in the shed then

jai_landrover · Oct 24, 2013

do you think someone else was silly enough to have fitted jag diff centre/gears and run custom shafts? Na

blue beasty · Oct 24, 2013

Pikey said:
That's weird cos THere's a early series salisbury axle, in the workshop. that's deffo 10spline.

I think you're thinking of the 2 front axles. Haven't touched the Salisbury yet

Dr_evil · Oct 24, 2013

:doh: you're totally missing the point here aren't you Jai

I want the stub axle assembly with 10 splines to see if it fits, if it does then I'll buy them ones and if not I'll buy the Dana 44 ones

The splined section is the same length and its the same set up as all other half shafts in the local just no 10 spline in stock

Banned

Well-Known Member

Banned

Well-Known Member

Banned

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Banned

Well-Known Member

Banned

Dummy Ejection Facilitator..

Well-Known Member

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Banned

Well-Known Member

Leaks an prone to bits dropping off

Banned

Similar threads