blackrandomapple
New Member
how do i tell if i have 10 or 24 spline diffs?
What is best?
And diff ratiao?
What is best?
And diff ratiao?
count th esplines on the half shaft - the right nes are the ones yu have taken out.
as fur diff ratios - mark the ring gear annd the pinion. rotate the pinion and count the number of turns till the ring gear mark has rotated one complete revolution - or count the teeth on the ring gear and pinion - it is the ratio of 1 to the other.
as fur diff ratios - mark the ring gear annd the pinion. rotate the pinion and count the number of turns till the ring gear mark has rotated one complete revolution - or count the teeth on the ring gear and pinion - it is the ratio of 1 to the other.
good point - mine had 10 splines on the diff end - dint count the splines at the other end, coz i dint take the hubs orf.
