[reg aldershot]

im wanting some 75mm stainless tube and bends so i can weld together and make a snorkle anyone know a cheap suplier there i can get maybe two 45 bends and 2 metres of straight tube cheers reg

 

[storm99]

You are in a bit of a jam, so try down in the tube station.

 

[jimbot90]

at midnight.

 

[reg aldershot]

now we are talking about music what about "beat up the mods" by peter and the test tube babies

 

[storm99]

now we are talking about music what about "beat up the mods" by peter and the test tube babies

You're on your own there..they've had a trying week

 

[kernowdragon]

There are several suppliers flogging pipe and pre-bent sections on fleabay, in various sizes. I was looking at doing the same thing.

 

[reg aldershot]

yes ive emailed one of the ebay shops in london for prices and would collect also gonna try an exhaust place too

 

[90truckcab]

get down yer local exhaust place, ther must be some ****ed up exhausts yer could buy off them cheap like,

 

[kernowdragon]

yes ive emailed one of the ebay shops in london for prices and would collect also gonna try an exhaust place too

Used to know an excellent exhaust place in Cambridge (not much good to you I know), built me a beautiful custom big bore system for my old Ital estate, yeah yeah yeah, stop laughing!

Had loads of engine work done, lowered stiffened suspension, fat track tyres. Ran like it was on rails, and left the then newly introduced XR3i's standing. A mate with a new 16v Corolla Twin Cam drove it and reckoned it way better than his. The old Ital held it's own fine until XR2's came along, then being lighter they had a slight edge.

 

[nicedayforit]

im wanting some 75mm stainless tube and bends so i can weld together and make a snorkle anyone know a cheap suplier there i can get maybe two 45 bends and 2 metres of straight tube cheers reg

Try this lot

Jetex Custom Exhaust Parts