Pikey
Dummy Ejection Facilitator..
Has anyone got any idea where the best place to wire a CB from on a Disco? Ive been given so much advice but nobody ive spoken to seems to know what to do.. any advice most welcome¬!!!The co-ax is already set up, its just the actual CB ..
Try the interior light wiring or direct to Battery.
Most peeps run em to the back of the CB. :doh:
if yu have an electric sunroof - in front of that.
If yu have a slimline CB - then above the sun visor or between seat and centre console.
else behind centre console.
Always wire it to the ACC circuit on the ign switch (or a circuit driven from it, such as the radio) .
If yu have a slimline CB - then above the sun visor or between seat and centre console.
else behind centre console.
Always wire it to the ACC circuit on the ign switch (or a circuit driven from it, such as the radio) .
So I take it that somewhere flush, or discreet, isn't an option?
It's a lousy design of cab and dash.
CharlesY
yup - discrete is poss - in front of the lecky sunroof or above the sun visor - both places in the roof console dont look to bad. Pikey used to have a link to the sunroof fit some where on anuvva site.
Last edited:
jdandcoke
New Member
i ment the coax is already there so where it stops would we a good place for the cb.
cousin has a cb in his disco its on the passenger side of the of the gearbox/footwell
Pikey
Dummy Ejection Facilitator..
You can't use a radio aerial to run a cb. Well not without frying it anyway. Yu have to run ya own coax for a CB. pref 50ohm coax. RG8 is good.
Mseries3
Well-Known Member
I run mine from the fag lighter. Found a socket up the shed, run it to a connector block then a inline fuse then to the CB. Then wedge the CB beetween passanger seat and the cubby box.
Compeletly removable as it is not used alot. Alot of people will say you get inteferance from the fag lighter... If you do it is negligible and from memory the SWR was quite low.
Plus i can move it from car to car with minimal hassal.
Compeletly removable as it is not used alot. Alot of people will say you get inteferance from the fag lighter... If you do it is negligible and from memory the SWR was quite low.
Plus i can move it from car to car with minimal hassal.
RG58, Pikey .
.
*minty*
Well-Known Member
Has anyone got any idea where the best place to wire a CB from on a Disco? Ive been given so much advice but nobody ive spoken to seems to know what to do.. any advice most welcome¬!!!
pink writin plays havoc in this kinda light :doh:
Rust never sleeps
jdandcoke
New Member
Tim.C
Active Member
Ooh some nice ideas here.
I didn't realise there was power up there - will have to use that for something. Maybe my blue tooth gps or a blue tooth handsfree for my phone (or both)
Not sure about putting a CB up there, would feel too much like a trucker!!!!
IFAIK car radio coax is fine for CB - it probably is RG58 which is 50ohm
RG8 is a bit thick - a real bugger to fit PL259 's to. Or did you mean RG58??
RG58 is also the old coax networking cable.....I always used that as I had tons of it. Still have somewhere.
I just to freak out some more people - you can use your radio aerial as a CB aerial as well - though not directly. You need some matching coils.
I used to have a switch box on mine to switch between FM and CB. It worked great and was certainly good enough for local contacts an convoys.
Though that was with a wing mounted electric aerial - no idea how the crappy window thing in a Disco would work. I'm sure it would be good enough for convoy/laning.
I'm going to dig in the loft tomorrow and see how big my CB is - it might fit in that sunroof gap
I didn't realise there was power up there - will have to use that for something. Maybe my blue tooth gps or a blue tooth handsfree for my phone (or both)
Not sure about putting a CB up there, would feel too much like a trucker!!!!
IFAIK car radio coax is fine for CB - it probably is RG58 which is 50ohm
RG8 is a bit thick - a real bugger to fit PL259 's to. Or did you mean RG58??
RG58 is also the old coax networking cable.....I always used that as I had tons of it. Still have somewhere.
I just to freak out some more people - you can use your radio aerial as a CB aerial as well - though not directly. You need some matching coils.
I used to have a switch box on mine to switch between FM and CB. It worked great and was certainly good enough for local contacts an convoys.
Though that was with a wing mounted electric aerial - no idea how the crappy window thing in a Disco would work. I'm sure it would be good enough for convoy/laning.
I'm going to dig in the loft tomorrow and see how big my CB is - it might fit in that sunroof gap
*minty*
Well-Known Member
Rust never sleeps
:hysterically_laughi
