[Oddie]

got a new toy daft??

You'll drive past nelly out of fuel aside the 303 so do stop for him - best take a can o doozul just in case!

Right what other long standiong friend can i insult... sorry chaps!

 

[The Mad Hat Man]

" long standiong friend" - hey - steady on there. peeps will start to talk

 

[muply]

Spray em Matt Black Then you can forget the polish

 

[mark 4x4]

Spray em Matt Black Then you can forget the polish

i have lol but iam not saying owt else about mine as i will be classed a troll !

 

[bustersbus]

Spray em Matt Black Then you can forget the polish

Satin black's a wee bitty better

If ye do decide tae spray them, don't forget the etch primer or it will just peel back off

 

[mark 4x4]

etch primer from hafords ( upol **** ) then 2 pac satin black out of gun worked best for me lol

will be harder wearing i hope !

 

[Def west ender]

Here's my unshiney Landy! Will show you after all the Chequer Plates been polished :-D

 

[Sirus]

needs polishing, its way too dirty

 

[oil dripper]

needs polishing, its way too dirty

well lend the fooker me mop an gi,em sum g3

 

[Sean]

i bet he's plated the inside of the rear door and the footwells

 

[Oddie]

Here's my unshiney Landy! Will show you after all the Chequer Plates been polished :-D

I have the same (almost new) tyres as those on my 90 only on alloys which are way too bling for where i live but would suit london far better - fancy doing a swap (assuming they are 265/75 AT's)???

 

[Bromsgrove Defender]

Here's my unshiney Landy! Will show you after all the Chequer Plates been polished :-D

Jeeeze if thats unshiney you should see mine


Are you planin on puttin any more chequer platin on it

 

[Def west ender]

i bet he's plated the inside of the rear door and the footwells

No I haven't and am not intending to either (it did cross my mind though).

 

[Def west ender]

I have the same (almost new) tyres as those on my 90 only on alloys which are way too bling for where i live but would suit london far better - fancy doing a swap (assuming they are 265/75 AT's)???

Maybe, got a pic? The wheels on there have some fancy spacers not too sure if they are just to widen the track or to fit the stud pattern, probably just to widen me thinks.

PS the wheels on mine are new too.

 

[boydy1989]

Here's my unshiney Landy! Will show you after all the Chequer Plates been polished :-D

By the way - your landy looks really smart in my opinion. Im not supporting the chequer plate, cos ill get it ripped outta me if i did, but it does look smart.

Definitely get out there and see what it can really do though - its well worth it!

 

[BOOMER]

You may laugh, but try some Cillit Bang on the ally - its a mild acid so should work.
By the way, you got some rust on your A-bar mounts

 

[Oddie]

You may laugh, but try some Cillit Bang on the ally - its a mild acid so should work.
By the way, you got some rust on your A-bar mounts

and while yer on if you could just do the bathroom grouting, there's a good chap
whilst shouting...
MY NAME'S BARRY SCOTT!!!

 

[treestump]

yer bein daft.

ditch the feckin bling bling stuff.

the only thing landys should ave on em is mud!

Or cow**** Treworgy, dont forget the ****

 

[BOOMER]

and while yer on if you could just do the bathroom grouting, there's a good chap
whilst shouting...
MY NAME'S BARRY SCOTT!!!

NO NEED TO SHOUT!!!

 

[woods767]

Wouldent worry about it "def west ender", looks nice as it is. Ive sprayed mine black to suit the motor, but youve gota prime it with sepcial metals primer first.

Youll not be able to get it shiney unless you attack it with acid or summin, the surface of the metal oxidises more over time. If its all the same age, then its probaly all the same colour

ps, chequer plate is good.