hippomassage.jpeg
 
@Stanleysteamer well, well, well. Here is our SU carb "expert tuner" showing us all a perfect plug after a tuning session.
Just like the guy in the YT clip advised look at the fire mark/band on the earth strap of the plug. 100thou' band just above the thread of the plug.
View attachment 347138
100 thou. So 1/10 of an inch. Without measuring it, just looking at by eye on your pic, that looks to me a bit more than that.
Just saying. Have you actually measured it?

And I am not sure who you are referring to, is it you, being ironic about yourself, or is it the rolling road, jockey?

So I reckon it could take a bit more advance if the Merkin bloke is correct
 
100 thou. So 1/10 of an inch. Without measuring it, just looking at by eye on your pic, that looks to me a bit more than that.
Just saying. Have you actually measured it?

And I am not sure who you are referring to, is it you, being ironic about yourself, or is it the rolling road, jockey?

So I reckon it could take a bit more advance if the Merkin bloke is correct
Sorry, the pic of that plug was from the guy AC DODD who you professed a dislike for. His day job is tuning SU carb'd engines.

I am going to be doing a bit more miles tomorrow going to that show so I will pull the plugs after that round trip and take a look.

Dodd does all his stuff with a Snap-on strobe & Rev counter/degrees of advance tool and a lambda pipe bunged up your exhaust to make sure you have lambda 1 across all the rev-range.

I will be happy to have clean and tidy plugs without soot all over the electrode & earth of the plugs. :D
 
Suns oot sky is black over the hills, coffee is slurped time to make some noise..im off out to cut some steel.

Njoy yer day peeps. :):)
 

Similar threads