border

Well-Known Member
Need one of these , for 200 Tdi Injection Pump. looked and looked, but can not find part number, Dont even know the correct name for it. only found the Banjo bolt that goes through it. Anyone know?? Thanks
 

Attachments

  • 20250629_115856.jpg
    20250629_115856.jpg
    457.8 KB · Views: 24
  • 20250626_192911.jpg
    20250626_192911.jpg
    709.7 KB · Views: 23
So what is the pipe used for… is it an oil feed? Its it not shown as a part of the 200Tdi injection pump in LRs parts book, but maybe in the associated hoses section.
 
So what is the pipe used for… is it an oil feed? Its it not shown as a part of the 200Tdi injection pump in LRs parts book, but maybe in the associated hoses section.
Rear of HP injector pump for the fuel I . Spur is for the return form the injectors.

I recon this part is still attached to the lift pump
And just checked shed and not 1 fitted to an old pump
 
Be aware that the banjo bolt that secures it on is not a standard bolt.

It may look like one, but its not - if you look closely, its got a pinhole, instead of a normal hole.

As for the "banjo" itself - you can, im sure, get banjos with two tails at 180 degree rotations. It wouldnt be an original part, but it would function just as well.

I suspect the special bolt is a standard order item, but the fuel line / banjo combo will be some sort of unobtanium.

Use nylon pnumatics pipe. Bonus marks for clear, so you can see any air ingress.
 
ERR3652



 
ERR3652



Every time I google it they come up but not what I am looking for.
 

Similar threads