Hot wevva today. At one point we had rain twice. Just enuff to wet me slabs then stopped. Big clouds going across. Sad news one ov me water butts is drippin. Need to empty it and put some more sealent round the tap ole. Gorra free ladder this week. Opens as an a frame anorl. Furd bit then slides up.
 
IMG_20250621_215340_1~2.jpg

Do you know why I landed on this rock, Bleeding Musk that's why. See that hole leaking fluid, do you know why Mr Bleeding Musk. A clue is in my pocket called a bit of Starlink.
Satellite punched my craft.
I was on my way to a wedding 40 bleeding light years away from your sun. Do you want know what my wife and daughter said to me about being late Mr Bleeding Musk. Let's just say, you've better got a good amount of vaseline handy as I shove those satellites up your arse.
Regards X5
 
I suppose that if you try and recut the thread wiv a die it just goes round and round? Maybe you could clamp the tie-rod and ball joint to stop this?
I fink your way may be better, unless it starts to go round and round as you use the saw.
Best of luck!

I cut the damaged threads off by getting another nut & used the ugga dugger to nip it on the rod end, then used a pry bar
to hold put pressure down on the tie bar & cut the treads flush with the nut using a skinny cutting disc with a dewalt cordless
grinder. :)
 
Mornin
Dull and breezy
Off to get some Euros this morning for the road trip, three days to go 😊 😊
Polished half of the Freelander, do the rest later if it doesn't rain
Need plasters for the first aid kit and a warning triangle, should have everything then 🤔
Liking this cooler weather
Stay dry all :)
 

Similar threads