[Mark Piercy]

Nope, you just measure it's length

 

[FEI]

Had some new tyres fitted this morning.
235/85R16 so only abit larger than standard

 

[FEI]

It came out without help!

You can use head bolts 3 times.. probably being over cautious

You can not reuse stretch bolts.
If its a normal bolt that has stretch but is still within its spec(goodluck finding what that spec is) then its reusable. But if its in any critical spot like headbolts reusing them is kinda like reusing headgaskets, im sure people have made it work but it still remains abit disgusting.

 

[Rubberknees]

Dropped the Rangie off this morning to have the steering knuckle joints changed . Should be ready later this afternoon for pick up

 

[Flossie]

Dropped the Rangie off this morning to have the steering knuckle joints changed . Should be ready later this afternoon for pick up

If you dropped it off for me to do, I'd still be trying to get one of the abs sensors out later this afternoon. Car would be ready to pick up, all sorted, some time in October. .
I proper struggled.

 

[Rubberknees]

If you dropped it off for me to do, I'd still be trying to get one of the abs sensors out later this afternoon. Car would be ready to pick up, all sorted, some time in October. .
I proper struggled.

I've taken 2 abs sensors with me just in case

 

[kermit_rr]

Hub is all back together and car has been driven. No more clicky clicky grind crunch!
Thank you everyone for putting up with me!

To end the week, i just renewed insurance lower than last year!

Just need to get it tracked at the garage

 

[Rubberknees]

Well top and bottom knuckles changed both sides good job @Flossie I took the sensors, they were used.. Both bottom knuckles were worn. Also left hand tyre was deformed on tread. Ended up buying four new (well old new) wheels with tyres for £60. Photos to follow. One was put on to get me home, up to yard tomorrow to fit the others.