Do they not have car breakers in Frogland ?

Décasseurs de voitures, parc à ferraille ?
Yep but they all sell bits for left hand drive cars.
The dipped beam might not pass the MOT in the UK.
Yep, it took me a little while to suss that out.
I am still wondering if I could get one and doctor it.
But yes they do hence I posted the price of 78 minimum. :(
 
I think the silver reflector is different, can you not super glue the broken bit back on ? Or use your plastic gun ?
These are all possibilities although my new gun uses heat to fit metal "stitches" or staples into plastic bits.
TBH I can't know until I have got the blasted bit off.
I have been waiting for the CitroenC3ownersclub to get back to me. Only one bloke has, he didn't know and just assumed it'd be like the ornery C3, which it ain't as I can tell by looking at pics of the bits once off, on Frog breakers sites.
Once I've got the bit off I'll put pics up.
 
This is all very well but peeps like us who have to have our passports stamped to prove we haven't overstayed our long-stay visas., will still have to get it done. TBH, at the moment it is still quite quick, but then we don't use airports nor the main terminals of the Chunnel or the cross channel ferries at Calais.
 
Afternoon folks :).

Went out for food last night as we couldnt decide what to make for tea.
Bad news is our little eatery has been sold and maynot be open this year😢. But we have found another (new place) its a bit further away 30-40mins, so we tried it. They still have to finish the landscaping so the seaview doesnt have builders rubbish in the view;).
Now its not often I decide to have steak here but I had a fillet and it was a 👍👍, starters were great too. So I guess we will go back again:).
Good beef steak is hard to get here so those that serve it usually charge a UK type price, but for about £18 I was well happy, and it was actually cooked to how I asked👍.

Apart from that its a lazy sunny sunday here:).

J
 
Afternoon folks :).

Went out for food last night as we couldnt decide what to make for tea.
Bad news is our little eatery has been sold and maynot be open this year😢. But we have found another (new place) its a bit further away 30-40mins, so we tried it. They still have to finish the landscaping so the seaview doesnt have builders rubbish in the view;).
Now its not often I decide to have steak here but I had a fillet and it was a 👍👍, starters were great too. So I guess we will go back again:).
Good beef steak is hard to get here so those that serve it usually charge a UK type price, but for about £18 I was well happy, and it was actually cooked to how I asked👍.

Apart from that its a lazy sunny sunday here:).

J
So why is good steak hard to get? If you don't mind my asking?
 
So, hot and dry today.
We have just got back from going down to the centre of the village where they have had their own "vide grenier". Nowt we wanted to buy, except plants, of which there were a lot on sale. So W had to buy 6 of course!
Enjoy the rest of the arvo peeps! :):):)
 
These are all possibilities although my new gun uses heat to fit metal "stitches" or staples into plastic bits.
TBH I can't know until I have got the blasted bit off.
I have been waiting for the CitroenC3ownersclub to get back to me. Only one bloke has, he didn't know and just assumed it'd be like the ornery C3, which it ain't as I can tell by looking at pics of the bits once off, on Frog breakers sites.
Once I've got the bit off I'll put pics up.
With modern lights its difficult to tell. I have a set of LHD headlights for the Beast sitting on the workbench and cant see much difference to whats in the car(RHD) at the moment.
I am guessing (from a bit of goggle) you have a clear front on the light, which says to me its all in the reflector and bulb position/rotation.

If its the bit that holds the spring clip that holds the bulb (sounds like)? could you not bond on a bit of "something" to the back to make a new 1 that would hold the bulb?

Of course its always the half a day to get it out to just have a look that these fancy modern cars give us :rolleyes:.

J
 
Fitting me garvester today. Just the drain pipe bit. Harvest bit will hafter wait till eye sorts out a hose pipe. Doing it when the sun hides behind the clouds. Got me scaff tower out so far.
 

Similar threads