[Sirus]

lovely blue skies here ya peasants

 

[The Mad Hat Man]

i know - its just aint fitted - this is wot it looks like at the mo...

 

[TheVengefulElephant]

but yer only doin the front end, shirly yer could just nose her in a bit and then yerl be dry enough ter weld wi'out gettin shocked

 

[Pikey]

ere Pikey - do yu know whats happened to Grunt? He has been conspicious by his absence.

Nooo int heard nuffink from him fer ages. Maybe his doris has got him locked int the cellar again or maybe he's gone orf to see Yella & Slob.

 

[The Mad Hat Man]

lovely blue skies here ya peasants

well? get orf ya arse - and finish ya disco - i need to borrow it .

 

[Pikey]

i know - its just aint fitted - this is wot it looks like at the mo...

FFS thas a bit shiny int it????

 

[Grippa]

but yer only doin the front end, shirly yer could just nose her in a bit and then yerl be dry enough ter weld wi'out gettin shocked

Ooooo noooooooo, then he might git his GT Faulty wet!

 

[Sirus]

but yer only doin the front end, shirly yer could just nose her in a bit and then yerl be dry enough ter weld wi'out gettin shocked

Oi Sirley get yourself down dafts and start nudging his front end in, he might even increase your landy fund

 

[Dorset VogueSE]

Dont fancy welderising all that galvanised stuff - not good fur yu that stuff, plus its a bastid to weld.

 

[The Mad Hat Man]

FFS thas a bit shiny int it????

yer - it is a bit - i gorra do a trial fit into Tufftee - then finish fabricating the headlight sections, then cut half the floor and bulkhead away, replace that - then start welding bits back together.










then do the other side .

 

[Dorset VogueSE]

Why yu fabricatin the headlight bits, I found yu a complete front panel, aint yu nailin that on??????

 

[Pikey]

Dont fancy welderising all that galvanised stuff - not good fur yu that stuff, plus its a bastid to weld.

Aye yer gets a good ole dose of Phosgene gas (Mustard gas to yu owld bastids) when yer weld Galvie. so best done outside or whilst wearing an airfed facemask.

 

[Dorset VogueSE]

ahh but the effects proably wunt be noticable on Daft

 

[Grippa]

Aye yer gets a good ole dose of Phosgene gas (Mustard gas to yu owld bastids) when yer weld Galvie. so best done outside or whilst wearing an airfed facemask.

Or grind it orf the edgy bits yer weldering.

 

[The Mad Hat Man]

Why yu fabricatin the headlight bits, I found yu a complete front panel, aint yu nailin that on??????

thats plan b - it also dont come with the headlight rear panel and the top section, so i wud have to fabricate those

 

[The Mad Hat Man]

Aye yer gets a good ole dose of Phosgene gas (Mustard gas to yu owld bastids) when yer weld Galvie. so best done outside or whilst wearing an airfed facemask.

i thought my throat was a bit sore after

but i was told it was Cyanide!

 

[TheVengefulElephant]

Ooooo noooooooo, then he might git his GT Faulty wet!

Bu' tha's in one of his uffer ones int it. he's got about 10 garages.

 

[Pikey]

Ere ya go summat ta read before yer crank yer welder up. Welding Galvanized Steel – Safely

 

[The Mad Hat Man]

i like these bits..

When zinc vapor mixes with the oxygen in the air, it reacts instantly to become zinc oxide. Zinc oxide is non-toxic and non carcinogenic. Zinc oxide that is inhaled is simply absorbed and eliminated by the body without complications or chronic effects.

When welding galvanized products that have thin, uniform coatings and the process is gas-shielded MIG or flux core, the fumes generated are sparse and the shielding gas blows them away from the welder; this is frequently sufficient to avoid metal fume fever without further action.

 

[TheVengefulElephant]

are you welding towards yourself daft?