[Sirus]

After the engine were rebuilt 15 mnths ago the car has got slower and slower on the pick up......

found out why

1400 miles later

 

[Tervueren]

Looks like a typical made from liquorice cam to me
Any good http://www.pipercams.co.uk/NewPiperWeb/redesign/05cams/rover_serpentine_cam.pdf

 

[The Mad Hat Man]

real steel do good cams for rover injuns.

 

[choppa]

After the engine were rebuilt 15 mnths ago the car has got slower and slower on the pick up......

found out why

1400 miles later

jeeesh thats shockin , 1400 miles !!

can ya not send the cam back ??? thats bad that is ...

 

[david451]

jeeesh thats shockin , 1400 miles !!

can ya not send the cam back ??? thats bad that is ...

Seen that before when fookers dunt change both cam and followers at same time. If yer lifters have a big dish on them chances is thats what happened. Yer photo's not clear enough to tell if thats the case, but old followers destroy a cam.

 

[Sirus]

it was all replaced.....it been replaced again now free of charge. should think so too

 

[Dorset VogueSE]

it was all replaced.....it been replaced again now free of charge. should think so too

Yes but what about the bit of the cam that aint part of the cam anymore. Would be interestin to know what all them little bits of metal have been doing to the rest of the engine????