[boggle]

are these worth the £200????

X-eng High Performance Off-Road Engineering

 

[Griffdowg]

yer... save you the hassle of removing the drum and cleaning the brake and re lubing the pistons on the actuators each time is seizes. i will be getting one in due course

G

 

[tjwaines]

had one sat in my shed for a while for when i change my tranny box, which is away at the reconditioners at the moment, soon as its fitted ill let you know what i think, looks like a quality bit of kit!!!
cheers
tom

 

[Griffdowg]

they look to be "fit and forget" parts. Ive been informed that the units produced by scrap iron are made of toffee. how true i dont know, but speak to Simon at X eng and get the original from him.

G

 

[boggle]

i need to do something as my handbrake is ****.....it looks like a bit more reliable too....

 

[Pikey]

I 2nd what griff ses Scrapiron are well known for nicking everyone elses ideas and designs and then making a **** job of copying them using crap inferior parts and charging the fooking earth for them. Companies like these should be avoided like the plague!!

 

[GRUNT]

I avn't had any trouble with the standard set up since I replaced the rubber seal thing, greased the bits wot needed greasing, an cleaned the ****e out of the bits that needed the ****e cleaning out of em.

 

[landy10]

I avn't had any trouble with the standard set up since I replaced the rubber seal thing, greased the bits wot needed greasing, an cleaned the ****e out of the bits that needed the ****e cleaning out of em.

That sounds as though you could have lifted that comment from a shirt lifters forum

 

[Trewey]

are they good? - yes.
are they worth £200 - no.

 

[hughesy]

Never had any problems with the standard one. Even if it needed completely replacing it wouldn't be anywhere near 200 quid.

 

[Sean]

are they good? - yes.
are they worth £200 - no.

Si is quite active on that lr4x4 forum and offers a discount to members if you buy items off his site via the special link

tis a lorra money to replace something that works very well if it's adjusted correctly

 

[HuN73R]

Ive got an X-Eng. Its the fookin bollox!!

I had no end of trouble with my drum brake. Yeah they work when they aint full of ****. But I cant be fooked to strip it down and service the fooker everytime I go mud pluggin!

With the x-eng you just jet it off and its good as new! Even when it is covered in **** it still works far better than my drum brake ever did!

As for £200... Im pretty sure I only paid around £150 for mine!!

 

[TheVengefulElephant]

Its a landy, the handbrake int sposed ter work very well anyway

 

[iannotts]

Hmmm new acutators are only £18.00 need a lot of them to make ya £200 back

 

[Griffdowg]

as stated they aint quite 200 nicker.

my time is worth that money so id rather not be stripping down the piece of ****e original set-up. as soon as mine starts playing up its gone.

G

 

[HuN73R]

as stated they aint quite 200 nicker.

my time is worth that money so id rather not be stripping down the piece of ****e original set-up. as soon as mine starts playing up its gone.

G

Here Here!!

I got mine for just over £150 I think. My mate ordered 2 - one for me and one for him and we got a good discount!

 

[boggle]

when i do the scorpion event next year i want to be able to rely on the handbrake.......

 

[choppa]

theys very easy to fit , and work just as they should .... replaced my original one with an xbrake cos mine kept stickin ... i had a bit of trouble with the cable rubbin but it was no big deal to sort ..... well worth it in my opinion....

 

[GRUNT]

That sounds as though you could have lifted that comment from a shirt lifters forum

Hope the hairdressers don't read it they'll get all flustered.