Jon Dor Well-Known Member Oct 25, 2021 #1 Afternoon all. OB diagnostic says my 2000 4.6 Thor has an open circuit knock sensor. Where is this located please? Thanks in advance for the plethora of advice that'll avalanche in response :~} Kind regards, Mike.
Afternoon all. OB diagnostic says my 2000 4.6 Thor has an open circuit knock sensor. Where is this located please? Thanks in advance for the plethora of advice that'll avalanche in response :~} Kind regards, Mike.
pwood999 Well-Known Member Full Member Oct 25, 2021 #2 Both sides of the block below the exhaust manifolds. More likely to be a broken wire to the connector, or bad connector.
Both sides of the block below the exhaust manifolds. More likely to be a broken wire to the connector, or bad connector.
Jon Dor Well-Known Member Oct 25, 2021 #3 pwood999 said: Both sides of the block below the exhaust manifolds. More likely to be a broken wire to the connector, or bad connector. Click to expand... Cheers Mate. I figured it'd possibly be a wiring issue, but had no idea where it was located. Thanks for your input. Mike
pwood999 said: Both sides of the block below the exhaust manifolds. More likely to be a broken wire to the connector, or bad connector. Click to expand... Cheers Mate. I figured it'd possibly be a wiring issue, but had no idea where it was located. Thanks for your input. Mike
pwood999 Well-Known Member Full Member Oct 25, 2021 #4 unless diagnostics says which one, you need to check both.
Jon Dor Well-Known Member Oct 25, 2021 #5 Will do. I've ordered a new one and will fully check out wiring and connections. Cheers!
