kermit_rr

Very
Full Member
Got the cover off the motor easy enough and the 4 bolts holding the gearbox to the back plate, but the spindle is very stiff. Should the back plate just slide off the spindle? Ie. secure the plate and tap the spindle through, or is there anything stopping it? Looks like the bit round the spindle is riveted in place
16139189045180.jpg
 
Got the cover off the motor easy enough and the 4 bolts holding the gearbox to the back plate, but the spindle is very stiff. Should the back plate just slide off the spindle? Ie. secure the plate and tap the spindle through, or is there anything stopping it? Looks like the bit round the spindle is riveted in place
View attachment 231492
Got a nice big hammer you cam borrow if you want to try it:D
 
Is there supposed to be some kind of bearing in the end of the motor cover to keep everything in line?
 

Similar threads