Henry_b
Think outside, no box required.
Managed to acquire a Lightstone parcel shelf, rare as shyte in good condition.
And very expensive to post because of its length
In other news this has appeared
Luckily you can't see it from 5 steps
Need to refit the chair trim and carpet trim, once I fix the sunroof leak
And very expensive to post because of its length
In other news this has appeared
Luckily you can't see it from 5 steps
Need to refit the chair trim and carpet trim, once I fix the sunroof leak
RangeRoller dt
Well-Sprung Member
How much was the shelf??
Henry_b
Think outside, no box required.
Shimsteriom
Master Procrastinator
Henry_b
Think outside, no box required.
RangeRoller dt
Well-Sprung Member
You did well there, shame bout the delivery but to get good one not broken. They do take a hammering but mark from dog paws£24 + £18 delivery
Henry_b
Think outside, no box required.
Also decided to move her up a few feet to give me incentive to clear out the old barn, gotta do it some day!
But then reliased the Fat bitch won't fit between the doors
Also decided to compare to a standard "4x4"
Of course that made for a shameless photoshoot.
But then reliased the Fat bitch won't fit between the doors
Also decided to compare to a standard "4x4"
Of course that made for a shameless photoshoot.
Shimsteriom
Master Procrastinator
That light blue car looks dirty!
I think you need to clean it.
I think you need to clean it.
Henry_b
Think outside, no box required.
That light blue car looks dirty!
I think you need to clean it.
Pfft she will get dirty when the winter comes
2 years ago believe it or not
Ohh and don't leave the bonnet ajar when a show storm is going on
, 
RangeRoller dt
Well-Sprung Member
Fat Fudge
Make door bigger, it’s a LRin’ shed anyway so needs to suit purpose
Make door bigger, it’s a LRin’ shed anyway so needs to suit purpose
Henry_b
Think outside, no box required.
Some things are sent to test “us”
So please tell
J
In short.
I want to pull the 4.6 and rebuild it, then stuff it in the D2.
Then with a big hole in the RR that needs filling, i want a 5.2 Stroked Rover V8 with all the kit.
Merlin heads - fast road cam - LLoyd ECU and loom
etc etc
just a proper kit.
Just thinking out loud!
Think as loud as you want
When we replaced the engine in the autobiography, I so very nearly chose the 5.2 stroked top hat. But was away at the time and all the extras was a pain. M needed a car we air freighted a V8 engine from UK to here.
You have time and age on your side (plus spare vehicle). Money might be the problem though.
Nothing wrong with a 4.6 disco.
J
When we replaced the engine in the autobiography, I so very nearly chose the 5.2 stroked top hat. But was away at the time and all the extras was a pain. M needed a car
we air freighted a V8 engine from UK to here.You have time and age on your side (plus spare vehicle). Money might be the problem though
.Nothing wrong with a 4.6 disco
.J
Henry_b
Think outside, no box required.
Think as loud as you want
When we replaced the engine in the autobiography, I so very nearly chose the 5.2 stroked top hat. But was away at the time and all the extras was a pain. M needed a car
You have time and age on your side (plus spare vehicle). Money might be the problem though
Nothing wrong with a 4.6 disco
J
Money will be an obstacle!
Or i'll keep to the rationale and just build my 4.6 and plonk it back in the p38!
Henry_b
Think outside, no box required.
Would love to see how that would work with the P38, it is a tad more complicated.
I've already contacted them about it and they said it was too complicated to convert.
And that was converted by london electric and it was 50k all in. so eh.
And that doesn't make a v8 noise.
a fully built 5.4 RV8 is 5k.
But even thats too rich for me.
