Ive never had this problem but if I was going to try and fix it the first thing I would do is have that off and then try and follow any wiring to the ignition barrel.
From reading your previous posts you have a 2001 P38?? Looking at the ETM there will be two wires going to the lamp, one is Red and the other will be Purple and Red. Have a look for those wires with the column surround off.
Thanks for the reply. Yeah, I had the shroud off ... and there's *lots* of wires going to and fro! I'll have another go and look out for the ones you suggested.
It's at the 5 o'clock position as you're looking at the ignition switch, just pull the wires and the connector comes out bulb and all. The other connectors are for the ignition key sensor.
It's at the 5 o'clock position as you're looking at the ignition switch, just pull the wires and the connector comes out bulb and all. The other connectors are for the ignition key sensor.
Job's a good 'un. Bulb replaced and working AOK. The old one was burnt black!! It was made a tad easier when my wife pointed out that the steering wheel adjusts towards you as well as up and down.