[Marmaduke]

Just swapped my injection pump over that was leaking from the throttle spindle only to find the replacement one has started to leak from the front shaft into the timing case Which one is the easiest fix?

Thanks in advance

 

[neilly]

I did the throttle spindle bush and o rings, was pretty easy, not had to do the other leak so do not know about that.

Kit cost about £14. there is a how to linked in here
https://www.landyzone.co.uk/land-ro...p-leak-from-the-throttle-spring-pivot.324129/

Cheers

 

[neilly]

One thing to add, not sure if it made any difference, except it does not have the cold start fitted.

Mine is actually a 200tdi pump on a 300tdi engine.

Cheers

 

[Marmaduke]

I did the throttle spindle bush and o rings, was pretty easy, not had to do the other leak so do not know about that.

Kit cost about £14. there is a how to linked in here
https://www.landyzone.co.uk/land-ro...p-leak-from-the-throttle-spring-pivot.324129/

Cheers

Cheers pal, I'll get a kit ordered from ebay

 

[Kev12]

I did one of these kits (not on a landy but same pump) and neglected to buy the full kit. I only bought the bush and not the spindle which was a mistake because both parts were equally worn.

I got my parts from http://www.diydieselshop.com/