[Pauliil1948]

hi guys , 2006 Freelander td4 , one off the hoses is burst not sure what one order as looking under bonnet left hand side it's a rubber hose ,any help would be good thanks ,

 

[freelance]

Turbo to inter cooler hose, or inter cooler to inlet manifold hose, probably best to replace both with silicon ones

 

[Nodge68]

You want this http://www.island-4x4.co.uk/interco...or-mount-0306-britpart-pnh500190-p-25526.html.
Or fit a full set of aftermarket silicone replacements, which is what most owners do.

 

[Arctic2]

Intercooler hose which goes to the EGR through the top plastic air intake, I fitted these below to my TD4 when I had it.
https://www.ebay.co.uk/itm/LAND-ROV...hash=item43cbde39a4:m:miMrYYVDLbJblIZP4h9v2ew

 

[teddywood1]

i had mine from DPH and I have had 2 sets as I left my old car with them on but they seem not to want to listen to me I did phone them the one that comes of the egr and goes to the inlet system is actually to big for the end that goes onto the inlet it is about 4mm difference to the egr end

 

[Arctic2]

i had mine from DPH and I have had 2 sets as I left my old car with them on but they seem not to want to listen to me I did phone them the one that comes of the egr and goes to the inlet system is actually to big for the end that goes onto the inlet it is about 4mm difference to the egr end

It is also a little long therefore if you cut it back a bit as in the photo's below it fits perfect, I used the cut off to put over the intercooler pipe to stop it rubbing on another pipe /hose