[domderbyshire]

Evening, All.

My front axle breather pipe recently decided to try and make friends with the exhaust pipe. The exhaust pipe repulsed its advances. So, I would like to fit a new breather pipe. I have the part, but wondered on the correct routing. I can't simply copy the routing of the existing pipe as it's moved. Does the curved end hook over something? I have new pipe and zip ties at the ready plus, I believe, a 14mm spanner.

Many thanks,

Dom

 

[lynall]

Iirc it travels on top of the axle to the nearsise along the top of the left radius arm up into the engine bay at the back of the cylinder head.

 

[domderbyshire]

Thank you. I'm going to have a look tomorrow. I hope the old one comes undoes ok.

 

[frog hopper]

Iirc it travels on top of the axle to the nearsise along the top of the left radius arm up into the engine bay at the back of the cylinder head.

Wot he said.

 

[lynall]

Thank you. I'm going to have a look tomorrow. I hope the old one comes undoes ok.

Make sure the banjo and the bolt are clean and clear, not unusual to see rust inside them.

 

[domderbyshire]

All done. Thank you for your help.