[defendermikey]

Hi there, my rear exhaust bracket (the one as soon as you come out the back box) isn't hanging by too much.
Firstly, is this a generic bracket and where can they be bought from?
Secondly, my friend has just started learning to weld (he's practicing doing new rollers etc on a boat trailer using an arc welder) and thinks he'd be up for the job. Any tips? Like maybe fitting the new bracket before cutting the old one off etc (if space allows for such a move). Thanks!

Heres a pic.

 

[Al2O3]

Looks like the pipe may not have a lot of life left in it, so may be worth not disturbing it. Bracket looks like it will last as long as the pipe.
If you want to investigate brackets to buy you could look on the YRM site YRM LINKY Read the descriptions, for each bracket, and they'll tell you if they fit TD5, 200Tdi etc.
Or, you could look on Paddocks, LR Direct etc.

 

[jamesmartin]

Hi there, my rear exhaust bracket (the one as soon as you come out the back box) isn't hanging by too much.
Firstly, is this a generic bracket and where can they be bought from?
Secondly, my friend has just started learning to weld (he's practicing doing new rollers etc on a boat trailer using an arc welder) and thinks he'd be up for the job. Any tips? Like maybe fitting the new bracket before cutting the old one off etc (if space allows for such a move). Thanks!

Heres a pic.

View attachment 102166

bracket bolts on its wcu101320 youd probably need 2 x bh110351 m10 x 175mm