[series 3 sweet 16]

:censored: I've probably just brought a ninety C-REG with a 200tdi, chassis needs work but I'm ok with that as body and bulkhead is good it's a van hard top. but I was thinking of making it a BOWLER OR TOMCAT, WHAT IS INVOLVED IN THIS? and how much would I get for the one piece doors and the rest of the body and what do I do with current chassis? front is solid but rear half needs replaced?

PS any idea's on tomcat body cost's? this would be done on a budget so second-hand parts.
any help would be great thanks

PPS 07880220904

 

[zeaphod]

:censored: I've probably just brought a ninety C-REG with a 200tdi, chassis needs work but I'm ok with that as body and bulkhead is good it's a van hard top. but I was thinking of making it a BOWLER OR TOMCAT, WHAT IS INVOLVED IN THIS? and how much would I get for the one piece doors and the rest of the body and what do I do with current chassis? front is solid but rear half needs replaced?

PS any idea's on tomcat body cost's? this would be done on a budget so second-hand parts.
any help would be great thanks

PPS 07880220904

I don't think the words Bowler or Tomcat are really compatible with the word budget

 

[top drive]

let me think about this.

you want to take a vehicle with a suspect chassis and a good body works and bulkhead.

then get rid of the 2 good parts and build it into a space frame on a ropey chassis ?

your not making any sense !

 

[nobber]

:censored: I've probably just brought a ninety C-REG with a 200tdi, chassis needs work but I'm ok with that as body and bulkhead is good it's a van hard top. but I was thinking of making it a BOWLER OR TOMCAT, WHAT IS INVOLVED IN THIS? and how much would I get for the one piece doors and the rest of the body and what do I do with current chassis? front is solid but rear half needs replaced?

PS any idea's on tomcat body cost's? this would be done on a budget so second-hand parts.
any help would be great thanks

PPS 07880220904

So you want a C reg 200 tdi Bowler with a ropey chassis?
You are talking about the Bowler EXR right? I think the tdi might be a little underpowered.

Here is the spec for a tomcat type build. Might give you an idea of how to approach this.

http://www.tomcatmotorsport.co.uk/advert_74.htm

 

[series 3 sweet 16]

whats the cheapest 90 galvi chassis as budget is crap?

 

[trax]

whats the cheapest 90 galvi chassis as budget is crap?

welding your own up and getting it dipped

 

[Pricilla]

I love early 90’s....you can't cut up a nice early 90, repair it to standard and sell or just sell buy a good chassise'd and engined Disco with rubbish body and then fit one of these 100 Challenge/Trialer Spaceframe

Just playing with the idea...best of luck

 

[nobber]

whats the cheapest 90 galvi chassis as budget is crap?

What exactly is your budget?

 

[trax]

What exactly is your budget?

whatever he can get for the body panels of the 90

 

[nobber]

whatever he can get for the body panels of the 90

Nothing then.

 

[Ian46]

I'll give im a quid for it.

 

[nobber]

I'll give im a quid for it.

For his budget? That's not really going to help much now is it?

 

[trax]

For his budget? That's not really going to help much now is it?

he could get a poster of one

 

[Ian46]

No, a quid for the landy he's about to f*** up

 

[series 3 sweet 16]

well basically the man who owns it at the min has said I can pay up and work on it in the mean time and use his tractor for lifting it's bit and bob, £110 a month up £825 so far I have £155 saved for her, it's a van hard top, low miles, 200TDI Disco engine, discovery 1 steel wheels (5 of them) C-REG, one piece early 90/110 doors MINT, wheel carrying bonnet, GREAT bulkhead, chassis needs some TLC, had a new clutch when engine put in, and the VERY SEXY galvi side caps, so I was hoping to RESTORE and modify but I wont have the budget so, I will be selling the 200TDI for a N/A 12J. oh and the body is PREtty straight. SOOOOOOOOOOOO very excited.

 

[trax]

well basically the man who owns it at the min has said I can pay up and work on it in the mean time and use his tractor for lifting it's bit and bob, £110 a month up £825 so far I have £155 saved for her, it's a van hard top, low miles, 200TDI Disco engine, discovery 1 steel wheels (5 of them) C-REG, one piece early 90/110 doors MINT, wheel carrying bonnet, GREAT bulkhead, chassis needs some TLC, had a new clutch when engine put in, and the VERY SEXY galvi side caps, so I was hoping to RESTORE and modify but I wont have the budget so, I will be selling the 200TDI for a N/A 12J. oh and the body is PREtty straight. SOOOOOOOOOOOO very excited.

curious, what's so good about one-peice early type doors?

 

[series 3 sweet 16]

No, a quid for the landy he's about to f*** up

I've :censored: made (SHIRE'S) PHOTO A POSTER!! lol :mooning::wtf:

 

[series 3 sweet 16]

curious, what's so good about one-peice early type doors?

good point as they always go wrong on the winding mechanism's LOL but they good as they work and they have no rot, and the galvi caps are not painted or rotting,

 

[trax]

good point as they always go wrong on the winding mechanism's LOL but they good as they work and they have no rot, and the galvi caps are not painted or rotting,

was wondering because mines a creg with the early doors.. be nice if they were rare beasts

oh and yeah one of my winders is funky

 

[top drive]

sounds like a pretty nice truck as is , why #### about making it worse ?