If its condensation inside the lens, take the bulb out and blown hot air in with the wife's / girlfriend's hair dryer.
bluedog333
Well-Known Member
Doubt they're serviceable, you can take the lamp out of course but the glass will be sealed onto the reflector.
easye1
Banned
a shame there not plastic ones, as my son has polished up both outsides on his sisters KA
one was accident scratched, so he just polished out the scratches with fine wet an dry, then fine green scourer, then paint polishing stuff (farecla) ?? on a soft cloth, then finer body polish, then mums furniture polish..
he done both but one was much easier...
look like new sparkly headlights now....
one was accident scratched, so he just polished out the scratches with fine wet an dry, then fine green scourer, then paint polishing stuff (farecla) ?? on a soft cloth, then finer body polish, then mums furniture polish..
he done both but one was much easier...
look like new sparkly headlights now....
I've got some Hella lights that are cloudy. Been thinking of fixing them, but I don't know how. I reckon a lint-free cloth, secured to a screwdriver with some zip ties or something, and then spraying some brake cleaner into the light, and swirling the rag around from the light-bulb-hole might work...!? Not tried it though.
timtheenchanteruk
Well-Known Member
brake cleaner or anything similar is likely to take the silver off the back of the fitting as well.
Is this a guess or a fact?
Degreaser might work, because most likely the dirt is a bit greasy.
Landyfox
Well-Known Member
I agree with Fanny, get a new set of crystal headlights.
MeatCleaverX86
Active Member
could always try swilling round some petrol to rinse it out obviously let it dry and air out after !
there is also some decent degreaser made from concentrated oranges that shouldn't damage anything !!
there is also some decent degreaser made from concentrated oranges that shouldn't damage anything !!
Last edited:
MeatCleaverX86
Active Member
when I upgraded to wipac crystals i sealed the lamp in with a high temp glue gun to stop crud getting in in the first place seems to be working and if a bulb goes its easy to peel off !
