[greyhair]

Finished the axle rebuilds this weekend, so just have to wait on my new chassis to arrive
so im going through my list of things to buy ect
I was thinking about making my own brake pipes but i dont have the tool to flare the ends etc

so is it worth buying the kit and doing my own or buying a complete set
or is there any member who would be willing to make me a set for a fee

 

[ONE LIFE LIVE IT. D90]

Slightly different to what your saying. But i had copper brake pipes made up by a local motor factor, that is generally very good trade prices for stuff.

But, in the end its actually worked out more expensive having them made up, than buying the pipe/unions and flaring too. Halfords sell 25ft of pipe for £10.
Basically i wish i had made my own.

Hope this helps

 

[waldershelf]

I've got one of these flare tools, Franklin Tools Hand Held Brake Pipe Flaring Tool AF2003 3/16: Amazon.co.uk: DIY & Tools perfect flares every time. Use cunifer tube not copper, there are a number of stories on the web about copper tube failing in service, although I've never actually met anyone who had a copper pipe fail.

 

[ratty]

Make em yourself and buy a flaring tool.

 

[aaronmorris]

Buy a tool and do them yourself.
Infact didn't landowner offer do make you some up on another thread a while back?

 

[greyhair]

Buy a tool and do them yourself.
Infact didn't landowner offer do make you some up on another thread a while back?

Did he ?

I have no idea mate I have so much sh** going around in my head to do with the rebuild its mad
you should know you have done x3

 

[aaronmorris]

Did he ?

I have no idea mate I have so much sh** going around in my head to do with the rebuild its mad
you should know you have done x3

I think so I'll try and find it.
Yes, I know what you mean mate, This 6bt scares me a little

 

[aaronmorris]

Did he ?

I have no idea mate I have so much sh** going around in my head to do with the rebuild its mad
you should know you have done x3

Found it.
http://www.landyzone.co.uk/lz/f7/braided-brake-lines-making-my-own-brake-lines-254797-2.html

 

[Southernlandy]

Depends how much you going to spend on a tool, I paid £80 for two tools so in the end it cost more to make them but in the long run it will be cheaper

 

[payydg]

I'm making my own. You can get a cheap second hand flaring tool off ebay. New pipe benders and cutters are cheap but you could also get these second hand.

SEALEY BRAKE PIPE FLARING TOOL AK5063 | eBay

 

[greyhair]

I think so I'll try and find it.
Yes, I know what you mean mate, This 6bt scares me a little

Yes I bet,thats what you call a project

 

[captainbeaky]

+1 for the cunifer pipe.
It's nicer to use, easier to straighten and form, and doesn't work harden as much as copper.

 

[trax]

+1 for the cunifer pipe.
It's nicer to use, easier to straighten and form, and doesn't work harden as much as copper.

looks prettier for longer

 

[captainbeaky]

Yeah - that too.

 

[greyhair]

looks prettier for longer

sounds good

so what is needed fitting etc
will buy a kit and do my own
as i guess this will not be the last rebuild i do

COME ON RICHARDS WHERE IS MY F***ing chassis

I Hate waiting