[D90mitch]

offer!

send the bits to me and I will crimp em for ya.

Thanks for that but I I need them done as soon as they arrive as the new seats go in. Much appreciated though. I will have a look again at my options.

I will have a look at those clamps that allow multiple cables in, that sounds like just what I need. If I can't find any, expect to hear from me soon

 

[D90mitch]

These look like just the thing:

2 PIECES CLASSIC MODERN CAR VAN BATTERY TERMINAL CLAMPS CABLE CONNECTORS 1 PAIR | eBay

 

[trax]

These look like just the thing:

2 PIECES CLASSIC MODERN CAR VAN BATTERY TERMINAL CLAMPS CABLE CONNECTORS 1 PAIR | eBay

why not just solder though? isn't that what you did anderson side?

 

[D90mitch]

why not just solder though? isn't that what you did anderson side?

I'd rather have it bolted on if possible. Though those terminals on the clamp are pretty small. Arghh :flame2:

 

[D90mitch]

They should do it I reckon:

PICK YOUR SIZE - COPPER TUBE LUGS CABLE CRIMP TERMINAL RING BATTERY STARTER LUG | eBay

 

[trax]

I'd rather have it bolted on if possible. Though those terminals on the clamp are pretty small. Arghh :flame2:

nooo i don't mean solder the wire to the battery term.

i mean solder the wire to the copper crimp like https://www.youtube.com/watch?v=zssIlnwH8dY

i presume you did this to the anderson.

hope that made sense.

 

[D90mitch]

nooo i don't mean solder the wire to the battery term.

i mean solder the wire to the copper crimp like https://www.youtube.com/watch?v=zssIlnwH8dY

i presume you did this to the anderson.

hope that made sense.

Ah yes, I see! That's what I was going to do yes! I haven't done the Anderson Connectors yet, ordering it all now and yes it would be the same method for the Anderson connectors. Gonna be expensive for some cable and connectors Though with something like this it's got to be propper.

 

[trax]

Ah yes, I see! That's what I was going to do yes! I haven't done the Anderson Connectors yet, ordering it all now and yes it would be the same method for the Anderson connectors. Gonna be expensive for some cable and connectors Though with something like this it's got to be propper.

fiver for 10 crimps and 5 per meter welding cable.. should do it all for 15-20quid, no?

ooo another option

Welding Cable Lug 50 mm² Re-Usable | eBay

 

[D90mitch]

I think i've got it sorted now. Anderson connectors and all, £55 . Can't remember how much cable I've got now (away at University for the next couple weeks) but I'll have to wait and see I guess. Might be able to scavenge some cable from other / old jump leads etc. Going to go for 50mm Cable accepting anderson connectors I think.