[John506]

Nvm checked Rave

 

[barmatt]

I will go out now with the torch. any ideas which fuse it is?

there's a picture on the panel with a door and a key on it

 

[barmatt]

That'll be ace if that's all it is ...

it would be ace, I do hope it is

 

[John506]

There is no fuse in it!!!! Hopefully this is going to be an easy fix, got a couple of fuses in the shed any idea on rating?

 

[discool]

I will go out now with the torch. any ideas which fuse it is?

C3 which is 15amp fuse or should be.

 

[barmatt]

There is no fuse in it!!!! Hopefully this is going to be an easy fix, got a couple of fuses in the shed any idea on rating?

sounds promising.....

 

[busagsx1300]

I had the same problem and spent a few quid trying to sort it. In the end a bought a central locking kit off ebay £23.99 delivered and I installed the complete kit in June 2011, and it still works perfect!

 

[John506]

Ok guys put a blue fuse in C3 where it was missing and my hazards come on and won't go off until I remove the fuse, when I operate driver's door lock, none of the others work with it, any ideas :s

 

[barmatt]

Ok guys put a blue fuse in C3 where it was missing and my hazards come on and won't go off until I remove the fuse, when I operate driver's door lock, none of the others work with it, any ideas :s

Sounds like the fob was lost and the alarm box has been overridden.

 

[John506]

It has a Sticker on the window saying Cats Land Rover Anti Theft System if that's any help?

 

[barmatt]

It has a Sticker on the window saying Cats Land Rover Anti Theft System if that's any help?

not really, that's to stop the radio getting nicked iirc.

Just found it...

Clarion
Anti
Theft
System

 

[John506]

Ahh, think I might resort to one of those central locking kits that busags was talking about!

 

[discool]

What has the fob got to do with it? the remote function was an option on the 200 series security systems, the system doesn't need a fob unlike the passive system of the 300 series.

Flashing of the hazards and being unable to use the central locking is an indication of the inertia crash sensor having activated.
You may also have an unknown electrical problem of course.

 

[discool]

Ahh, think I might resort to one of those central locking kits that busags was talking about!

Get your self a Haynes manual and u will see how simple the CL system is.

 

[John506]

Get your self a Haynes manual and u will see how simple the CL system is.

Gone one on it's way to me in the post

Can you reset the inertia switch if that is the problem?

 

[discool]

Gone one on it's way to me in the post

Can you reset the inertia switch if that is the problem?

Glad u said "if that is the problem" because who knows"

Resetting is simple just turn the ignition switch on-off-on again.

Activating can happen if u hit a bump hard, or even knocking the security ECU under the dash where the inertia system is.


CATS (Computer Anti-Theft System) another name for a coded head unit. I hope u have the four digit code

 

[John506]

I will have to have a look tomorrow after I drag it out of the driveway and jump start it as my battery is near flat, not enough charge to even turn it over Then I can have a go at the reset sequence and have a look under the door card

 

[John506]

Oh and I have a ****ty head unit at the moment that doesn't even fit, wires everywhere and the aerial has snapped off on the front wing so no radio, only found out after I aquired it!