[leeby7]

Hi was wondering if you can buy the sections that make the seat box up? mines rotten on the battery tray side, the panel facing the rear axle?

 

[craigyb]

Not seen em but i may be wrong. Just cut a piece of 2-3mm steel to shape and weld it in.

 

[td5tool]

Got mine for my 200 from YRM solutions
Bit dear bit very good quality and fits very well

 

[Landyfox]

There's a reliable seller on eBay who sells them!

To be honest they are easy enough to make, us cardboard to make a template and then buy a sheet of 3mm steel. You can either weld or potrivit into place.

 

[leeby7]

cheers for that

 

[landowner]

There's a reliable seller on eBay who sells them!

To be honest they are easy enough to make, us cardboard to make a template and then buy a sheet of 3mm steel. You can either weld or potrivit into place.

Cant pop rivet according to my mot man, he failed me on the fibreglass matting that I reinforced the bottoms with, and the non standard (plastic) floor that I put in.

He said it was too close to seat belt mounts

 

[Landyfox]

Cant pop rivet according to my mot man, he failed me on the fibreglass matting that I reinforced the bottoms with, and the non standard (plastic) floor that I put in.

He said it was too close to seat belt mounts

Are you serious.?

In that case pop-rivet it in place and cover the rivets with liquid metal

 

[jamesmartin]

Hi was wondering if you can buy the sections that make the seat box up? mines rotten on the battery tray side, the panel facing the rear axle?

which bit do you mean , battery tray is steel and will weld

 

[leeby7]

battery tray end piece, the bit facing the rear axle.