[Rustystuff]

more...

ready for paint....

That it one Red Range Rover !!

It will be a real head turner !
An impressive amount of work Zen... a real credit to you. Look forward to seeing it finished

Will be interesting with a GMC 6.2 !!

 

[zen]

Why LPG on a Diesel unless you are plumbing it into the turbo

20% more power or economy..thats why..(me 4 door nissan 6 pot turbo diesel powered, runs it too...its like it has 8 cylinders when switched on!!)
really only works wonders with old school non ecu controlled diesels...

todays (read 2 hrs after work)efforts...

 

[stutab]

Is that direct into the air inlet?

 

[zen]

on an n/a yes.(just like open lopp on say 3.5 v8).but on turbo its post turbo into boosted air stream before manifold


this evenings........

lots of pics sorry

new (to me) wings turned up..THANKS TNT FOR BASHING THEM!!****S

bolted some bits on..

for the hole inda roof

voila!!

 

[zen]

**** ####

it was miles away...and yet while welding!!!

it was perfect!!

so need 2 door or early 4 door passenger seat..actually any condition as long as plastic on back is good ...head rest would be good too??

please..this has set me back major like!!so angry...there are fist marks in the steel walls...

 

[Dr_evil]

I've got a pair of RRC 4 door front seats that I could part with think they're from the 80's though so not quite the same but the cloth looks about right if of any use

 

[Dr_evil]

**** just realised yours have a belt inside the seat thing, mines don't have the cover they bolt onto the side and have a pocket in fabric on the rear

 

[zen]

shame...thanks anyway..

 

[fanatic]

what about re upholster

 

[zen]

be too much...its the back thats the bitch...

looks like i will be learning to use a leather needle in sewing machine...no point in trying to get teddy bear fabric..no hope..

so all the seats cream leather..have to be diy ..cost..

 

[stutab]

If I get the EFI (the one from the woods) my old seats will be spare if they are any good to you.

 

[zen]

they may well be!!

any chance of a pic???thanks!!

 

[zen]

todays stuff...

chassis welded where needed
rear springs installed
other stuff too..

anyone have access to early rangie and can give acurate measurements of where rear seat locking bracket goes on rear inner panels?..po had moved seat from oe postion and anyway i have new panels.(no holes)

thanks

 

[200tdi ayre]

todays stuff...

chassis welded where needed
rear springs installed
other stuff too..

anyone have access to early rangie and can give acurate measurements of where rear seat locking bracket goes on rear inner panels?..po had moved seat from oe postion and anyway i have new panels.(no holes)

thanks

Pics are upside down youth

 

[stutab]

they may well be!!

any chance of a pic???thanks!!

This is the best pic I got. They are buried at the mo but if you want better pics I can take some tomorrow. I agreed on the EFI today so as long as the seats can be salvaged these are up for grabs. Any bits you want off the EFI let me know.

 

[zen]

kool

does it have front quarter lights (windows)

are the seats grey??

anyway

todays efforts....

got the rear seat in..what a barstard!!it had been put in wrong place by po..so had no original holes to line it up with..took hours to get just right..

started (run out) to rust proof inner panels so i can blt on outers..

started on front wings..

 

[stutab]

Yes they are grey.

Which windows do you want?

The windscreen is no good, which is a shame as I need one.

 

[fett]

neither are the windows for him , he wants the front quaterlights I think and thats too late to have them

 

[stutab]

Ye solid front windows. I know the bits he means now.

 

[Saint.V8]

'Ere Stu...

Is that pic with the Lad in driving seat from the EFi??

Didn't think they had Choke Cables in the EFi...or am I being a total noob?