[Btrower]

Hi I moved the rr out the drive to give it a wash and on full lock to the right the hdc fault came on.i switched the car off and on again the fault went away until i turned the steering again it's only when I get at full lock. Any ideas?
Thank

 

[Saint.V8]

Check your ABS sensors and wiring.....they chaff on the inside of the wheel at full lock wearing through causing ABS, HDC, DSC and EAS faults....

A quick plug into Diagnostics will hopefully show a stored fault code....

It could also be the Steering Angle Sensor....but check your ABS sensors first, I have had this twice due to failed ABS wiring on both front wheels....

 

[Btrower]

Thanks saint v8 il have a look today and get it booked in to specialist

 

[2.0_hippo]

Thanks saint v8 il have a look today and get it booked in to specialist

You don't need any specialists
Just have a look yourself

Pop off the wheel and check the condition of the cabling

 

[Saint.V8]

You don't need any specialists
Just have a look yourself

Pop off the wheel and check the condition of the cabling

+1....this was the state of one of mine....