[DB Freelander]

Guys

I'm trying to get a look from underneath my freelander 1 to investigate a power steering leek.

I've hit my first obstacle though and wondered if anyone could offer any advice -

I'm trying to get the undertray off - so far have removed two bolts so the thing is now hanging down - bu88ered if I can work out how to completely 'unhinge' and remove the edge of the tray nearest the front of the car ......

Any advice gratefully appreciated

D

 

[dazjam]

many helpful posts here - search for 'undertray' and lots to see... like

http://www.landyzone.co.uk/lz/f9/gettin-engine-undertray-off-36879.html

 

[DB Freelander]

Thanks Dazjam

Tried doing a wider search (rather than forum specific) and suddenly got loads of results back !!!!!!

First hurdle resolved - undertray + frame to remove - thanks again

David

 

[JonFre]

Thanks Dazjam

Tried doing a wider search (rather than forum specific) and suddenly got loads of results back !!!!!!

First hurdle resolved - undertray + frame to remove - thanks again

David

Up to 03 it's relatively easy, 04's and on the two front bolts can be awkward.
Need a good 13mm socket if they have not been touched for a long while or if the garage did them up with air.