gcoo8154
Well-Known Member
Help
Need to remove my 90 hardtop tub to be able to shot blast and paint the rear end of the chassis
Can anyone help or assist
Thanks
Andrew
07798695688
Frizington Cumbria
firstly remove the sides and roof them undo all the bolts and lift it off simple really
ohh and get rid of your number dont no whos browsing the web these days
bustersbus
Well-Known Member
firstly remove the sides and roof them undo all the bolts and lift it off simple really
ohh and get rid of your number dont no whos browsing the web these days
Ye might've deleted the number in yer quote anaw:doh:
defenderdavie
New Member
its worth jet washing the underneath 1st so you can find the bolts
MrJC
Well-Known Member
I would put each set of nuts and bolts and screws into tubs or bags and label them. The rear corner bolts from the body cappings can be a bit of a mystery to put back if its your first time. Take pics.... only takes a few minutes but could come in handy. Consider replacing the seals, roof to windscreen, sides etc and a line of Tiger seal or silicone when fixing back..... a tool to remove the studs from the headliner is very handy.
Pikey
Dummy Ejection Facilitator..
Headliner?? fook me yu must have one of them posh 90's
yu fogot to mention the wiring in the rear O/S corner.
Vagrent
Yaaaar
Why is every one saying 'unbolt'? don't they simply *snap*
Well most of mine did, which was great because seized nut 'n' bolts take ages to unbolt.
Look on ebay for replacement nuts+bolt sets.
Buy multiples of the packs as they are NEVER complete and being stainless don't rust
LAND ROVER DEFENDER,S3 ,STAINLESS STEEL 30 FLOOR SCREWS on eBay (end time 21-May-10 22:13:00 BST)
LAND ROVER DEFENDER 90 110 STAINLESS CROSSMEMBER BOLTS on eBay (end time 22-May-10 10:44:20 BST)
LAND ROVER DEFENDER STANLS X-MEMBER BODY- CHASSIS BOLTS on eBay (end time 10-May-10 20:41:54 BST)
That's all on Eripoff, They don't rust and look super.
Or you could just buy a load of normal nuts and bolts
Well most of mine did, which was great because seized nut 'n' bolts take ages to unbolt.
Look on ebay for replacement nuts+bolt sets.
Buy multiples of the packs as they are NEVER complete and being stainless don't rust
LAND ROVER DEFENDER,S3 ,STAINLESS STEEL 30 FLOOR SCREWS on eBay (end time 21-May-10 22:13:00 BST)
LAND ROVER DEFENDER 90 110 STAINLESS CROSSMEMBER BOLTS on eBay (end time 22-May-10 10:44:20 BST)
LAND ROVER DEFENDER STANLS X-MEMBER BODY- CHASSIS BOLTS on eBay (end time 10-May-10 20:41:54 BST)
That's all on Eripoff, They don't rust and look super.
Or you could just buy a load of normal nuts and bolts
MrJC
Well-Known Member
Headliner?? fook me yu must have one of them posh 90's
yu fogot to mention the wiring in the rear O/S corner.
It suffers from droop
.... I also forgot to mention how you unscrew the rear view mirror
