[fett]

back lash will show without removing anything

Tell me how!

 

[fanatic]

chock front wheels, hand brake off and jack rear-grab the prop and turn both ways you will be able to tell slop in both transfer box rear output and rear diff about 1/8th of turn acceptable.
Do the same with front.
you will need all 4 wheels off the ground to fully test transfer box slop

 

[fett]

Cheers dude , I wil give that a try!

 

[fett]

Oh is it safe to jack up the on the bottom of the diff casing or will it crack?

 

[1992lse]

Cheers dude , I wil give that a try!

it means jacking the old girl up.you sure you will be ok:flame:

 

[goonarmy]

Oh is it safe to jack up the on the bottom of the diff casing or will it crack?

ya can but why not off the axle, its easier to reach

 

[fett]

what about me casing man?

 

[fanatic]

we have always done that(provided your jack has a nice wide foot mine about 4 inches(garage jack with rubber foot)
Or the rear arm bushes and a piece of wood/ply

 

[fett]

Thank you guys , well fanatic anyway Si

Good night,missus is demanding attention! :doh:

 

[fanatic]

 

[cornishdan]

fett ive got the same prob as you what was the fault with yours ??
i hate jacking the bloody thing up

 

[1992lse]

he aint bothered to find out. its still making the noise but not as much.

 

[cornishdan]

Bloody eck i've had this problem for 2 months thought i was being lazy by just leaving it

Suppose the jack and axle stands will be in use tommorrow :doh:

 

[fett]

I go away for 5 mins and come back to all this abuse, honestly lol

How come yours is doing it, had you box rebuilt or just bad luck?

Yes I am lazy when it come to jackin that giant fooker up, but I have probably only done 300 miles in that time at a push:mooning:

 

[1992lse]

that sounds almost right, the 300 miles and a push :hysterically_laughi
and if i did not give you abuse you would think i wanted something.

 

[classic kev]

Fett, clonking could be worn A frame bushes and/or ball joint, assuming of course you have checked out front suspension bushes, prop UJ's and you're reasonably happy it isn't front or rear diff.

 

[1992lse]

Fett, clonking could be worn A frame bushes and/or ball joint, assuming of course you have checked out front suspension bushes, prop UJ's and you're reasonably happy it isn't front or rear diff.

that would mean getting under the car Kev. not a hope of that happening.

 

[fett]

I spent nearly every day for a month under there when I bought it , not like you with you spray on tetroseal lol

I actually wire brushed and epoxied the while uderside of the car after cutting and welding in about 500kg of new steel!

Anyhoo you cheeky fook I am still waiting for Stuart to send me a stepper to try before I go to all that hassel!

Kev I gather you are wating for a bonnet cable too???

 

[cornishdan]

I did have a go at jacking it up but getting all 4 wheels off ground was a bit with a £15 trolley jack and 1 bottle jack, so put it back down which is why im still here able to type.

Mine just seems to clonk on the downshift into 2nd and 1st but smooth up shifts until the torque converter locks up which causes a bit of a jerk. Also when stationary it will rock the car when going between R. N. D.

Not had gearbox rebuilt think everything is original on it ( p38 DSE) 118,000 miles so something has a bit of a right to play up but what part is it

 

[fett]

told ya it was a fooker to jack up lol, I only got the same kit as you! lol