Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    Welded prop to vcu. Will it work

    See tomorro
  2. C

    Welded prop to vcu. Will it work

    I had a offer for it today so it sold. Aberdeen bound tomorro for a Mitsubishi piñin
  3. C

    Welded prop to vcu. Will it work

    Cheers. The welds looked pretty good. My dad did it and he use to be a welder. I am getting the odd bang from the rear diff. The mount is totally shot and needs changed now. Tested it in the snow and it pulled easy
  4. C

    Welded prop to vcu. Will it work

    I now have 4x4. No vibrations up to 60. Just a slight noise from my wheel bearing. The rear diff centre mount needs changed as there is a bit of movement but all seems good
  5. C

    Welded prop to vcu. Will it work

    I did think about that also. They yoke was sitting flat on the bearing and there was no side to side play. I will see if I have any dowels lying about and I'll report back tomorro
  6. C

    Welded prop to vcu. Will it work

    I did. I flattened the edge of the vcu to create a v shape to weld to. I think I'll drill a hole. Fit a tight fitting bolt. Cut the head of and weld up both sides and grind down. Fingers crossed the splines didn't strip due to a failed vcu.
  7. C

    Welded prop to vcu. Will it work

    That is actually a genius idea. I will do that before I fit it. Between the weld and a pin I'd hope it will be solid. Would a bolt be no use ? I guess it might be out of balance then
  8. C

    Welded prop to vcu. Will it work

    All the bolts ? I'll re use the old ones to try it out first
  9. C

    Welded prop to vcu. Will it work

    ........
  10. C

    Welded prop to vcu. Will it work

    My front prop and front splines on my vcu are both stripped. Suspect loose bolt then it eventually snapped. So tonight I removed the joint from the shaft. Cleaned what was left of the splines with a pencil grinder and the end of the vcu and welded them. Welder was at full power and it looks a...
  11. C

    Scotland

    The beallach gates won't be shut. It's the only route into applecross bar a long boring road. Head that direction then cross over to gairloch then Ullapool. Best roads there is. Plus i live here. Glasgow area is just traffic.
  12. C

    vcu questions

    Today I stripped the joint that has no splines. Cleaned it up with a grinder and pencil grinder. Torqued the welder and went for it. I'll get it fitted to the fl tomorro and see what happens
  13. C

    Freelander heater

    I see why you have so many posts
  14. C

    Freelander heater

    Cheers I had a read. It says that it's a 1.8 petrol. Not sure if the diesel model is the same
  15. C

    my first landrover

    Nice looking freelander. I also have a black 3 door. Yours looks much newer with those wheels and the roll bar removed
  16. C

    Freelander heater

    Great help thanks
  17. C

    Freelander heater

    I have a 99 freelander 2.0 td and the heaters are crap. I can do a 20 mile trip and its still cold. They do blow hot air but its not enough to warm the inside. Is there any tricks to sort this out. I'm sure there is info on this but I'm on iPhone and search doesn't work
  18. C

    Mot

    Mine failed today on the front number plate :(
  19. C

    abs / 3 amigos

    Ye the abs trick worked. Quite proud of myself
  20. C

    abs / 3 amigos

    Failed its mot today. Front number plate and a rear tyre which I already had to put on. Didn't realise the old one was so bad
Back
Top