Search results

Are there any members that are my way out [Boston /spalding area] that could knock me the air bag light out on a 38, not looking for a free ride;) cheers Andy BTW where is the airbag fault stored, is it in the BCM or airbag control unit?

on a 4.6 hse 1996 located under the o/s upper trim panel in the boot area very close to when the rear o/s seat release button is. It's a little black box with three pin plug and a single blue wire going to it. No numbers [well none that mean anything] any ideas??

RR p38 transfer box. I've had the coupling from the back and the high low motor so there is just the main unit. free, just come and get it. If it's still here in a week it's going for scrap.

There will be hundreds of boot floor posts on here but I can't find what I'm looking for. Lets say you have a 300 5 door with a rotten boot floor, cills seat belts points etc, normal 300 rot points. Mot's due so you remove rear seats and seat belts and take for the test telling the tester you...

yep i know thread title makes no sense what so ever but my question will probably make even less:confused: So lets say you live in the USA and you blow up a 300 tdi. Do you have it rebuilt in the states or buy a used one in the uk and have it shipped over. just trying to get my head round...

hi All, just done a quick search and not come up with anything. i have a 300 disco and just done the head. It was a bit of a pig to start first time but then ran fine once the air was clear from the fuel lines etc. However leave it for any more than about 10 mins and it's as if it's out of...

most of us know that the ball in the bell housing pushes through the release arm and the pedal goes hard. Thats the same feeling that i'm getting on the pedal with very little or no movement when I try to depress it but not everytime:confused: just been out in it and done about 6 mile to the...

having a bit of bother with an abs system on a 300. I'm I right in thinking that the earth points are numbered. From the wiring diagram I am looking at there are two earths from the ecu 1 to EP1 and another to EP5. What it doesn't tell me is the loaction of these points, am I going to have to...

Hi all I have a 96 disco that I have a problem with and can't seam to get to the bottom of it. It's hard to put into words what it does but I'll give it a go. 99% of the time its fine but then every now and then I get a vibration that feels like a wheel balancing problem only 100 times worse...