Search results

ok thanks for the help

just looked through the haynes manual, whats this about measuring piston protrusion to get the thickness for the replacement gasket thickness, would like to order it befor i start, is this just the normal haynes make a job harder than it is or do i need to do this

thanks

ok my mistake assumed it was the springs, but they are ok now dug down to have a look but found the bias plate has gone, this is i replaced with an oem one last year, not very strong any one know where i can a reinforced one as mine has broken in the same place as the one i replaced across the...

ok that all sounds good, do i need to get the head skimmed and pressure tested if so can any one recommend a place i live in south cheshire

ok thanks, thought it may be that from reading other posts, was just hoping it mayhave been something more simple,.......is this an expensive job on a 300tdi or is it easy enough to do myself ?

Hi any ideas, noticed on my way home from work the heater was not working, opended the bonnet to find coolant all round the expansion tank, also not much left in the system, so refilled her and then when i start the engine i got a waterfall of coolant from the expansion tank, so switched off and...

thanks for the replies, not sure without taking it apart but do remember i replaced the bias plate b4 will have to have a look to make sure plate is still ok, that was also from main dealer. oth probs now as well coolant flooding out from the expansion tank as soon as i start her (decided its...

Hi can anyone help, have owned my disco (300tdi) for 2 years and have just discovered the second set of bias springs on my gear box has failed, now sits between 1st and 2nd. both these sets of springs were purcahed from a main stealer (suprising they only cost about a £5) and repalced as a pair...

Well it looks good new oil pressue switch fitted on saturday and upto yet no light comming on :)

thanx, just ordered oil pressure switch less than £6 with postage.......... with my luck it won't be this cheap, o well fingers and all other bits crossed

having a small problem with my oil warning light comming on this is my first land rover i'm reasonable with a spanner but don't know much about these so :confused: when engine cold stays off when warm and revs above approx 900 its ok as soon as the engine is warm and revs drop to just...

ok thanks, thought it was ok but wasn't sure now its in there will just use the same.

just started to work through my recently purchased disco, gear oil next was told that dexron III is in there, reading posts on here is this a problem do i need to get the stuff out flush the box and use MTF (thiink thats what i saw recommened) or is it ok to keep using it any help ? as its...

well when some one has a picture of a sheep and is talking about bums, sticks and a gary glitter all you can do is take no notice

Just like to say hi visited site a few time prior to splashing out on my 4 wheel money pit, from what people have said looks like its a good job i don't mind getting me hands dirty, its my 1st landy had it it for a few months :) now just wonder why i never bought one earlier.........when fuel...