Search results

Hi I'm half way through changing the motor in the heater unit. I realise you have to split it in two to take out the motor and have removed all the metal clips and screws etc. Do you have to drill out two of the rivets holding the control levers frame onto the front of the heater unit to...

Only 81days to get the old 250k mile 200tdi ready for the MAC 4x4 next March:eek: After many months of searching threads on the forum, esp Green Hornet and Mr Noisy, I finally got stuck in with the grinder, spot weld drill and fire extinguisher and stripped the boot floor out and cut the rot...

I'm trying to get the old girl (200tdi 3dr) ready for next years MAC4X4 and have hit a couple of problems, so some advice would be appreciated. I've started tackling the sills and stripped off one side. Whilst trying to move the disco to strip the other side off it died on me:(. The battery is...

Hi All Heater fan has bust on my 200tdi and as i'm using the disco every day, due the snow, cant take it off the road to repair it yet. Has anyone come across a good aux heater for the interior, maybe 12v? I've done a forum search and found info on FBH's but this seems and expensive option...

Hi All Just got an old 3dr Disco 200tdi with all the usual problems including an intermitant heater fan. Sometimes its very noisy/ screechy and cuts in and out and then settles down and runs ok, doesnt seem to be working at all at the moment. I've done a fair bit of searching on the subject of...

Evening guys Would appreciate your views on auto 300tdi's, i've been offered one cheap for off roading - is the auto box any good for serious offroading?? Also is changing it from an auto to a manual box a big deal / possible? cheers

What are peoples thoughts, I've got a 84' 110 pick up, is it worth more / easier to sell converted into a hardtop or left as a pickup?? Dont know if its been asked before, couldn't find it in the search bit. feed back would be appreciated. cheers:)

Can someone please explain how / what the fuel cut off solenoid works/ does on a 2,25 weber carb? (other than obviously cut the fuel supply off!!!:D) I've had problems with the 110 suddenly running roughly coughing and spluttering, the general concensus is that the floats are sticking and...

I'm in the process of converting my 110 truck cab into a hardtop van, are there any regulations/ rules involved with putting seats in the back?? I'm hoping to remove the bulkhead behind the front seats and put a removal bar inplace to allow access into the back and then put two forward facing...

When I wang the old bus (2.25 petrol 110) to the left, eg turn left at a junction with a bit of speed on, she immediately starts coughing and spluttering and I've got to pull the choke right out to keep her going. It can then run roughly, coughing and spluttering along for bloody ages:(. My...

Hi All Would appreciate some advice from the series old sages. I've got an X reg series 3 petrol with a fairey overdrive. It was bought as a project but the usual work, kids, "er indoors":( have got in the way and not much has happened. I've now bought a 110 so the series 3 is completely...

Sorry to invade the series forum with a 110 question but I thought you guys would be better qualified to answer it as its got a 2.25 petrol engine. :D It started running very erratically with major misfiring and loss of power after a few miles. I let it cool down for a few hours and it drove...

Hi My 1984 110 truck cab 2.25 petrol struggles a bit on hills(There's lots of them in Wales) when towing . Is there a way of increasing the torque of the 2.25 or is it better/ easier to swap it for a 200tdi? I only paid £700 for it and only use it on the weekends so dont want to spend a...

Hi Just joined forum, does anyone have a roof and side panels for a 1984 110? I want to change it from a truck cab to a hard top. I've searched the For sale forum but cant find anything. Any help in pointing me in the right direction would be appreciated.

Hi All Just bought a 1984 110 truck cab 2.25 petrol. Great vehicle but no power steering so its like turning the QE2 doing a 3 point turn! It was used as a tow truck by a local car dealer so only has 16000 miles on the clock and is in v.good nick! Forums look really good.