Search results

Hi Datatek Thanks for trying to help me out!!! This problem has been bugging me for a while. I have a mate, that i can ask, but i don't know if he has an oscillascope. Maybe someone else, with a petrol 4.0, with working cruise control, could just check pin 11 on the Cruise control ECU and see...

So does that mean, that it could be ok? sorry, but i can check normal voltage, but i have never had to check "pulsing" voltage before!! It said on the ETM it should read 5 volts and 2.5 volts, but it didn't say anything about testing differently. All the other tests come back OK, this was the...

I checked the voltage at the BeCM and the ABS plug (yellow/green wire) and i get the same either end. i get 6.5volts with the ignition off and 1.5volts with the ignition on. This is the speed input connection. This relies on the ABS wheel sensors supplying this information. They also supply...

Just found this on Rave. Can't see for looking!! Speed Input Terminal 11 of the Cruise Control ECU (Z121) receives the Vehicle Speed output signal from the BeCM (Z238) through the Y or YR wire. The BeCM (Z238) receives the vehicle speed signal from the Anti–lock Brake System ECU...

Yeah, 100%!!!

Hello all i have had a problem with the cruise not working on my 4.0 SE, since i had the car, I have followed the ETM procedure in Rave and it comes back with one problem, which i will tell you about, in a minute. Everything mechanical is fine, vacuum pipes, bellows, pump. Electrical wise, i...

Also forgot to mention, that fuse 17 had blown. I replaced it and it hasn't blown again. Even with the EAS playing up. I don't know if that has anything to do with it. Kev

I will when i have a bit more time. I'm back at work for 6 days now! I know the brake light switch is brand new, as i changed it when i was having problems with my cruise control, but i will double check. Kev

Well, sort out one problem and another raises it's ugly head! I changed the EAS ECU today, (as you were aware i was having problems with the compressor not running and the suspension not moving up or down) and everything was superb. Suspension went up and down as it should straightaway and...

Hi I've just sent you a PM Kev

Hi Voguese39 I have sent you a PM Kev

Hi ssmn1234 I know!!! I know there are a few members around Nottingham, but if they haven't got a spare ECU, i can't really ask them to rip their own one out of the car! There is a guy on fleabay, that sells them for around £60. Might be worth a shot. Thanks for the offer of yours, btw, but...

Happy New Year and thanks again for all the help. Kev

Hello all First of all A Happy New Year to everyone. Some of you might've read my thread regarding my EAS problem (sorry, more EAS!). Anyway, it looks like it might be a faulty EAS ECU, but before i invest, i was wondering if anyone has a spare working one i could borrow for a few days. I live...

Yeah, good idea. I'm actually talking to Storey wilson at the moment as well, the guy that designed the EAS unlock software, to see if he can shed any light on the problem. He seems to know the P38 EAS inside out. The biggest problem seems to be the EAS not registering any faults, to point me in...

Hi ssmn1234 I haven't managed to do anything else to the car, as it is currently having/had a new airbag at the garage. I was due to pick it up today, but there are still problems with the suspension not budging. i was hoping having a new airbag, might've had some effect. They have run a load...

Hi ssmn1234 I understand what you're saying about the values, but whenever i used the software before and checked the heights, as you say all the values would be different, but relevant to the height of the vehicle, so if the front was lower than the back, the front valuse would be lower. I...

Well, i have checked the temperature and pressure sensors on the compressor, which work as they should. I have pulled the Relay delay from under the passenger seat and put it back in, but the compressor won't start up and the car still won't self level, up or down. It's going in to have the air...

R.rover, will do. Car is going into the garage tomorrow to have the airbag done, so i will see what happens after that! I will be checking the pressure and temp sensors and pulling the delay relay for the EAS. Here's hoping! Kev

Thanks Datatek, Will do that and i will check the pressure sensor and overtemp sensor as well. Easy and quick checks to do.