Sorry, more EAS!!

Little Kev said:

Hi ssmn1234

I haven't managed to do anything else to the car, as it is currently having/had a new airbag at the garage. I was due to pick it up today, but there are still problems with the suspension not budging. i was hoping having a new airbag, might've had some effect. They have run a load of tests, with their software and we seem to be coming to the same conclusion, that somehow the ECU thinks that whatever the height sensor readings are (which seem to be the same ones stuck on all 4), are correct for any height, no matter what ride height is selected. In turn the compressor isn't fired up, because it doesn't think it needs to raise it, if that makes sense?! these are only guesses at the moment, but i could do with borrowing a EAS ECU from a working Rover to narrow down the options a bit. Any ideas,help or suggestions from anyone are still appreciated.

thanks
Kev

Click to expand...

Little Kev said:

Well, sort out one problem and another raises it's ugly head! I changed the EAS ECU today, (as you were aware i was having problems with the compressor not running and the suspension not moving up or down) and everything was superb. Suspension went up and down as it should straightaway and height ride indicator flashed normally for a change! The problem came when i put my foot on the brakes for any length of time (more than 5 seconds). The EAS would hard fault and when i read the codes they were as follows:



FR signal incorrect

FL signal incorrect

RR signal incorrect

RL signal incorrect



I reset it, but it does this EVERY time i put my foot on the brakes. I have taken the brake light bulbs out, but it makes no difference. Even if i don't have the engine running, just with the ignition turned on, it faults exactly the same with exactly the same fault codes!! Any help would be appreciated.

Thanks Kev

Click to expand...