Search results

Pretty sure my turbo has gone....squeekin like mad when the turbo is called upon. TD5 Garret Turbo Couple of questions How do i check if the oil feed is blocked? How do i check if the turbo is knackered? Anyone had a decent recon replacement and could reccommend a source? Cheers Paul

Do you know which part was removed and did he just tighten up the shoes then? I have the same problem and its driving me mad!:mad:

Thanks for that, Been getting the gearbox overheat light on so was suprised to see it over filled...unless its generating to much pressure......will go throught the procedure and see what happens. Many Thanks

Can someone tell me where the fill plug is for the td5 auto gear box please. I can see one to the front with some pipes beny around it. Is this the one? If so oil is ****ing out and someone has overfilled. Or is it somewhere else:confused:

Hiya Has anyone changed over to the thick tubular ones from standard? Is it staight forwards? Roof lining to one side? Ebay link on the ones i have in mind. LANDROVER DISCOVERY 2 ROOF BARS - TUBULAR G4 VERSION!! | eBay UK Cheers Paul

That was in place and workin:confused:

Well taking everything out works :)

Hi 2000 TD5 Adventurer Have a rattle under the car which for all intents and purposes sounds like a centre box baffle loose...infact i changed the exhaust thinking it was that:doh: Ends up its in the handbrake drum housing...rattle stops with handbreak on. Took drum off and expected to...

Got a cheap ace block and pump on ebay ending in 30 mins if anyone wants to bid.:) Landrover Discovery TD5 Ace Pump on eBay (end time 09-May-11 18:16:03 BST) Landrover Discovery TD5 Ace Block on eBay (end time 09-May-11 18:30:37 BST) Taken off my 2000 td5 Disco and both in good working...

Interferance relay...PCT is a towbar company.

Ok no relays under the bonnet so guessing its a after market job. Shonky wiring would indicate the same.....:doh: Ok behind the drivers side tail light i have loads of wires added and a little box with PCT ON IT. The code is 17469-PCT-S1 Is this the relay for the grey?

thanks for this its good stuff.:) I did check it after starting the engine but yeah not running for long. Will check the relays. I have a pre 99 caravan so if i do sort it out.....whats my wire need to be inside the grey socket? Will post back tommorow. Cheers Paul

So took the passenger side light out and looked down to find a black box with no cables coming out.....took the drivers side out and its got chocky blocks everywhere!! Think will get it checked over by indespension:mad:

Will...as i say the grey plug was already on the car i just put a new plug on. The cable heads up in the same direction as the black one so would seem to be factory fitted....will report back. Might be a while as removing ace, and have a cracked coolant bottom drain plug housing :eek: Added...

Thanks mate Will check if the grey cable goes into this box where the off side rear light is. First port of call...have a multimeter so should be able to check power in there. Thanks for the link to...have a pre 99 van so will recheck the wires. For sure there is no power at the plug at...

Hi I have a 2000 discovery with twin electrics. Towing lights are fine but the grey socket has no power having checked with a multimeter. Looks like its factory fitted as the cable heads up inside the car behind the drivers back wheel arch. Any idea where the fuses might be or where the power...

HI TD5 Landrover Discovery - 2000 Hi does anyone within a couple of hours of Newcastle have the main bottom pipe structure which the coolant drain plug fits into going spare? Its metal with probably four pipes fitting in it. If not can anyone braze the existing brass plug housings...

Backing onto a caravan...get it wrong...blame the wife

Aye same problem with mine..AC probs need recharging to get that working no sure on the noise but i also have it :doh:

Thats great thanks..no maual so learning as i go. There is a button with an arrow pointing up for the air suspension...am guessing its to change the ride height at the back?? or is it to stiffen up under load....and if it is ride height why would you wanna change it? Cheers Paul