Search results

Hi Guys, New battery has sorted the problem. Also turns out the old battery was a little under powered, even when New. Thanks for your help.

Hi all sorry been away for a couple of days, I have just check weer in battery and very low, so suspect that is knackered along with poss earth strap. Guess off to get battery tomorrow. Will let you know how it goes.

Hi All, Problem on my s3 2.25 petrol started the other, all starting absolutely fine, until the evening, and all I get now when turning the ignition switch is a constant clicking from starter solenoid, it is only a couple of months old so am assuming it is something else, no movement from...

Ok for update we have taken then gearbox cover of and the layshaft bearing fell out as broken and also some wear on the main bearing, therefore we are replacing both as a precaution and also several gaskets and seals whilst it is in pieces. Also repairing handbrake as cakes in grease etc. Thanks...

I haven't checked half shafts on both sides, but certainly 1 side is OK as was jacked up, I have down to check the other side. The 4wd selector seems to be moving ok, but not taken anything off yet to inspect, as was concentrating on getting some sort of drive 1st. Will add to the list for...

Hi, I had a feeling that was going to be a suggestion, do you know where I can get hold of a decent manual as I do have someone that could help with an overhaul. guess it is going to be cheaper than a refurbished box.

HI All, Aplogies but this may be a long post. I have a 1976 Series 3 2 1/4 petrol and last weekend, I had to limp it home in 2nd and 4th as no other gears were available. It has been sat for a week as to dark by the time I get home from work. Spent the weekend investigating: - 1. Drained...

Sorry thought I'd added engine details it is 2 1/4 petrol 1976, and am based in Southampton area (forest side), it is odd that I can find the studs with part no. but not the nuts. Fastner stockist may be the easiest.

Hi all, I have removed the Water Pump as part of an overhaul of the cooling system, very dirty and radiator burst, so ideal time, but when removing the Water Pump an number of the Studs came out as rusted to the nuts, I have found replacement studs (pt no. 514527), but can't find what the nuts...

Gents, Thanks for the advice, I will see how it goes over the weekend, if my mate is free to help hold.

Hi All, I have broken a fixed side window and have managed to source a 2nd hand replacement, which is still fitted in the panel. Does anyone have removal and refitting instruction or guidance as it is not something I've attempted before. Thanks

Hi, I have developed a fuel leak on the brass inlet pipe, that the fuel line joins, it appears to be the brass pipe as this is moving and if pushed in the leak stops. I am probably missing something when searching, but is this a serviceable part as it does appear to be part of the refurb kits...

It appears that I have forgotten to introduce myself, before asking questions. I have a 1976 Series 3 2.25 petrol that I am trying to restore, and am new to Land Rovers although always wanted one to work on. Mechanical knowledge is also fairly limited so am on a step learning curve. For...

Thanks that is great and explains alot, it appears that somewhere along the line, the breather cap has been changed for the non breather system and the carburetor blocked off. The last question I have is that the where the hose plugs into carb adapter, there a curved hose with a flat silver...

Thanks, does that mean that I need to block off as at the moment it is just taking in air, doesn't seem to effect the running though, but is obviously not going through the filter

Hi All, I have a 1976 S3 2.25 petrol which is a running project, On the Air in take Elbow I have a pipe about 2/3 from the elbow and about 1/4" in diameter, that looks like it should have a pipe connecting to something, but I haven't been able to find anything in the manual. I am not sure...