Search results

Looking to fit a new camshaft for something a bit warmer such as an H180 and some tubular manifolds to my 96 3.9 Disco! Done a bit of reading, looks and sounds relatively easy to do, are there any pitfalls/things etc I need to be aware of? Thanks Errol

My speedo on the D2 has just stopped working!! No warning lights or anything on the dash to suggest a problem! Ive read that it is an electronic not cable speedo and the transducer is on the side of the transfer box, however there is also a suggestion that the system takes it road speed from...

Got to work this morning all fine on the run in but as I was pulling up to the traffic lights, LPG beeped and switched off and temp gauge needle went from normal (in the middle) to the red vey quickly, checked coolant level fine, LPG working fine! Its a D2 4.0 V8, 95,000 on clock with no other...

Evening, Just in the process of fitting a new cylinder head to the FL 2001MY following HGF. I've stripped the head from the engine, set the timing marks per the manual. 1. Took the cam sprockets off and the pegs are not lined up in the postions as shown in the manual 8 and 4 o'clock...

Hi all, The ever reliable (?) 1.8 that we have has been absolutely fine, it does have a multi layered head gasket........until today! Lots of bubbling water from the expansion tank, cant see any leaks around the cylinder head, however the temp gauge does not appear to move from the middle...

I have a 96 Disco ES. Is the front screen using a complete one piece seal or is it bonded ? Hopefully you can help so that I can buy the correct parts to stop an ongoing leak into the footwells. Tks :D

Can anyone help with the correct size door speaker and rear panel speaker for my 3dr? Tks

Hello, Just changed the front discs and pads, all ok, put the wheel on cant move it as it is tight up against the caliper, all parts used are OEM. The caliper appears to be approx 4mm outward, this happens on both sides! Any thought please as very fed up at the mo! Thanks:mad: