Disco 2 Td5 No power after 2.5k - 3k RPM

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
So quick update to you guys, I cancel the order for the launch scanner because a friend with a Nanocom was gonna read my truck but things didnt work out so anyways, I purchase a a new MAP and it also didn't work (although it was a cheap chinese one because I can't find the original Bosh).

Anyways for now I can live with AAP sensor disconnected and the wastegate bypass with 11 threads Its running at 1.4 bar, the truck runs waaaay better then before, it has a lot more power so I have more confidence to do overtakes on the highway.

It will stay like this until purchase a nanocom for better reading of the parameters
 
Question if I did the wastegate bypass does the ECU still can do overboost to protect the turbo if I set the threads too low?
 
I had a similar problem a few years ago and land rover guy I know replaced the injector seals. He said he knew this having had issues where he had done all the other stuff mentioned here with no joy. Sorted the problem and a fairly cheap repair.
 
Daviehilltown said:
I had a similar problem a few years ago and land rover guy I know replaced the injector seals. He said he knew this having had issues where he had done all the other stuff mentioned here with no joy. Sorted the problem and a fairly cheap repair.
Click to expand...
Hmmm other then lack of power above 3k rpm the truck always starts with no problem and runs well.
It's a cheap repair sure but I'm afraid of messing up the injectors lol then it becomes a very expensive repair.
I will study how to do it or find a good mechanic to do the job, tks for the tip
 
bahteles said:
I purchase a a new MAP and it also didn't work (although it was a cheap chinese one because I can't find the original Bosh).

Anyways for now I can live with AAP sensor disconnected and the wastegate bypass with 11 threads Its running at 1.4 bar,
Click to expand...
But did you plug back the AAP sensor after you swapped the MAP?
bahteles said:
Question if I did the wastegate bypass does the ECU still can do overboost to protect the turbo if I set the threads too low?
Click to expand...
Why did you bypass it? The overboost protection has nothing to do with the wastegate modulator but don't be afraid it will not go to overboost with AAP senso unplugged, it's even strange that you get 1.4 bar that way cos the ECU is supposed to limit the fuelling to max 1 bar
 
sierrafery said:
But did you plug back the AAP sensor after you swapped the MAP?

Why did you bypass it? The overboost protection has nothing to do with the wastegate modulator but don't be afraid it will not go to overboost with AAP senso unplugged, it's even strange that you get 1.4 bar that way cos the ECU is supposed to limit the fuelling to max 1 bar
Click to expand...
I did plug back the AAP with the new MAP, still runs poorly (not sure if it's the new MAP that was not working or if the problem is elsewhere)

I've install a turbo gauge and plugged from the turbo pipe to measure the 1.4bar, without the bypass or with the bypass but the aap connected it stays at ~1.1 or even lower when changing gears... with the bypass and 11 threads on the wastegate it stays at solid 1.4 all the time at full gas (which maybe too much but I'm enjoying having a little power right now 😅)

I did the bypass and disconect the AAP because it's the best result I've got so far, the difference in power is pretty big

1713201218509.jpeg


1713201254569.png
 
Last edited:
So... quick update for you guys, after months of driving with the AAP disconnected (and having terribly mileage) I finally bought a new MAP sensor... plugged everything aaaaaand, same thing lol

But, I noticed that it was overboosting now that I have the turbo gauge so I lower the threads until it stopped overboost and although 90% of people say to use 13 threads, mine took 19 to stop overboost. It feels like a new car now, it actually develop some decent speed so I think I'm now close to a standard D2 power.
 

Attachments

  • IMG_5039.jpeg
    IMG_5039.jpeg
    278.3 KB · Views: 65
You must log in or register to reply here.

Similar threads

bahteles
Disco 2 Discovery td5 auto cutting out after 2.500 rpm [Solved]
Replies
15
Views
4K
Steven Sheppard
S
MAF Diver
Disco 2 Rough idle in a V8 D2a — tried MAF, O2, sparks, leads
2
Replies
35
Views
3K
marjon
marjon
D
Rocker cover semi stripped bolt..
Replies
0
Views
378
Descapri
D
J
engine cuts out at high revs, eml on td5
Replies
2
Views
291
Tim4x4
Tim4x4
retrorides
Td5 rough at +3k rpm
2
Replies
28
Views
4K
hughdavies
H
Back
Top